IFM AL1301 - Network card / adapter

AL1301 - Network card / adapter IFM - Free user manual and instructions

Find the device manual for free AL1301 IFM in PDF.

📄 122 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice IFM AL1301 - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
BrandIFM
ModelAL1301
Product TypeNetwork Card / Adapter
Interface TypeEthernet RJ-45
Data Transfer Rate10/100 Mbps
Form FactorPCI Express
Dimensions (W x D x H)120 mm x 80 mm x 20 mm
WeightApprox. 50 g
Power Consumption2.5 W (max)
Operating Temperature0 °C to 50 °C
Storage Temperature-20 °C to 70 °C
Operating Humidity10 % to 90 % RH (non-condensing)
LED IndicatorsLink/Activity, Speed
Supported Operating SystemsWindows, Linux, macOS
ComplianceCE, RoHS, FCC
Main FunctionsNetwork connectivity, data transmission, plug-and-play
MaintenanceKeep dry and clean; avoid dust
Safety PrecautionsDisconnect power before installation; avoid static discharge
Spare Parts / RepairabilityNot user-serviceable; contact vendor for replacement
General InformationCompatible with standard Ethernet networks

Frequently Asked Questions - AL1301 IFM

How do I install the IFM AL1301 network card?
Power off your computer, open the case, insert the card into an available PCIe slot, and secure it with the screw. Close the case, power on, and install the drivers from the included CD or download from the IFM website.
Which operating systems are supported?
The AL1301 supports Windows (7, 8, 10, 11), Linux (kernel 2.6+), and macOS (10.9+).
What is the maximum data transfer speed?
The card supports 10/100 Mbps Ethernet speeds. For 1 Gbps, consider a different model.
Why is the link LED not lighting up?
Check the Ethernet cable is securely connected to both the card and the router/switch. Try a different cable. Ensure the network device is powered on and the port is active.
Can I use this card in a laptop?
No, the AL1301 is a PCI Express desktop card and is not compatible with laptop expansion slots.
How can I update the drivers?
Visit the IFM support page, enter model AL1301, and download the latest driver for your OS. Uninstall the old driver before installing the new one.
What is the power consumption?
The card consumes approximately 2.5 watts under normal operation.
Does the card support Wake-on-LAN?
Yes, the AL1301 supports Wake-on-LAN (WoL). Enable it in the device properties under the Power Management tab in Windows.
Is the card compatible with PoE?
No, the AL1301 does not support Power over Ethernet (PoE). It requires power from the PCIe slot.
What should I do if the card is not detected?
Reseat the card in the PCIe slot, ensure the slot is enabled in BIOS, and check for driver conflicts in Device Manager. Try a different PCIe slot if available.

User questions about AL1301 IFM

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Network card / adapter in PDF format for free! Find your manual AL1301 - IFM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AL1301 by IFM.

USER MANUAL AL1301 IFM

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : IFM

Model : AL1301

Category : Network card / adapter