ADI-2 Remote 2.0 - Audio/video converter RME - Free user manual and instructions
Find the device manual for free ADI-2 Remote 2.0 RME in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Converter Remote Control |
| Brand | RME |
| Model | ADI-2 Remote 2.0 |
| Dimensions (approx.) | 150 x 50 x 20 mm |
| Weight (approx.) | 200 g (including batteries) |
| Power Source | 2 x AAA batteries (not included) |
| Connectivity | Infrared (IR) and Bluetooth |
| Compatible Devices | RME ADI-2 series (ADI-2 DAC, ADI-2 Pro, etc.) |
| Control Range | Up to 10 meters (IR) / 30 meters (Bluetooth) |
| Main Functions | Volume control, input selection, menu navigation, preset recall, power on/off |
| Display | LCD screen with backlit |
| Battery Life | Approximately 6 months with normal use |
| Maintenance & Cleaning | Wipe with a soft, dry cloth. Do not use liquids or abrasive cleaners. |
| Safety Precautions | Keep away from water and heat sources. Do not disassemble. Use only specified batteries. |
| Spare Parts | Battery compartment cover (available from RME service center) |
| Repairability | Limited to battery replacement and cleaning; PCB replacement only by authorized service. |
| Environmental Information | Complies with RoHS and WEEE directives. |
| Included Accessories | None; batteries and manual may be included or separate. |
Frequently Asked Questions - ADI-2 Remote 2.0 RME
How do I pair the ADI-2 Remote 2.0 with my ADI-2 DAC?
To pair via Bluetooth, press and hold the Bluetooth button on the remote until the LED flashes. On your ADI-2 device, go to Settings > Bluetooth > Pair new device and select 'ADI-2 Remote 2.0'. For IR, no pairing is needed; just point the remote at the IR sensor.
What batteries does the remote use?
The remote uses 2 AAA alkaline batteries. Insert them with correct polarity as indicated inside the battery compartment.
The remote is not responding. What should I do?
First, check the batteries and replace them if needed. Ensure the remote is within range (IR: 10m, Bluetooth: 30m) and that there are no obstructions. For IR, verify that the device's IR sensor is visible. If using Bluetooth, try re-pairing the remote.
Can I control multiple ADI-2 devices with one remote?
Yes, you can control multiple devices if they are in the same room and within range. However, the remote will control whichever device it is paired to via Bluetooth, or all devices in line-of-sight via IR. To switch between paired devices, you may need to re-pair.
How do I reset the remote to factory settings?
Remove the batteries, press and hold any button for 10 seconds, then reinsert the batteries. This will clear Bluetooth pairings and restore default settings.
Does the remote have a backlit display?
Yes, the remote features an LCD with backlight that activates when any button is pressed. The backlight turns off after a few seconds to save battery.
What is the range of the IR control?
The IR range is typically up to 10 meters in direct line-of-sight. Reflective surfaces may extend the range slightly.
Can I use the remote with non-RME devices?
No, the ADI-2 Remote 2.0 is designed exclusively for RME ADI-2 series devices and will not work with other brands.
How do I clean the remote?
Use a soft, dry cloth to wipe the surface. Do not use any liquids, solvents, or abrasive cleaners, as they may damage the finish or electronics.
Is the remote water-resistant?
No, the remote is not water-resistant. Keep it away from liquids and moisture to avoid damage.
User questions about ADI-2 Remote 2.0 RME
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video converter in PDF format for free! Find your manual ADI-2 Remote 2.0 - RME and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADI-2 Remote 2.0 by RME.
USER MANUAL ADI-2 Remote 2.0 RME
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RME
Model : ADI-2 Remote 2.0
Category : Audio/video converter