FR25L1 - Switch HAGER - Free user manual and instructions
Find the device manual for free FR25L1 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Switch |
| Brand | Hager |
| Model | FR25L1 |
| Dimensions (H x W x D) | 80 x 80 x 40 mm |
| Weight | Approx. 100 g |
| Mounting Type | Flush mounting |
| Rated Voltage | 230 V AC, 50/60 Hz |
| Rated Current | 10 A |
| Contact Configuration | Single-pole, single-throw (SPST) |
| Protection Rating | IP20 |
| Material | Thermoplastic (flame retardant) |
| Color | White (standard) |
| Terminal Type | Screw terminals |
| Operating Temperature | -5 °C to +40 °C |
| Main Functions | On/off control of lighting or electrical load |
| Care and Cleaning | Wipe with a soft, dry cloth. Do not use abrasive cleaners. |
| Safety Notes | Installation by qualified electrician only. Disconnect power before servicing. |
| Spare Parts and Reparability | No user-serviceable parts. Replace entire unit if defective. |
| General Information | For indoor use only. Complies with IEC 60669-1. |
Frequently Asked Questions - FR25L1 HAGER
How do I wire the Hager FR25L1 switch?
Connect the live wire to the common terminal (L) and the switched live to the other terminal. Ensure power is off before wiring.
What is the maximum load for the FR25L1?
The maximum load is 10 A at 230 V AC, suitable for resistive loads up to 2300 W and inductive loads up to 500 VA.
Is the FR25L1 dimmable?
No, this is an on/off switch and is not designed for dimming. Use a compatible dimmer for dimming functions.
Can I use the FR25L1 outdoors?
The FR25L1 has an IP20 rating, which means it is not protected against water or dust. It should only be used indoors in dry locations.
What tools are needed for installation?
You will need a screwdriver (flat or Phillips depending on screws), wire strippers, and possibly a voltage tester.
Does the FR25L1 fit standard wall boxes?
Yes, it is designed for standard flush mounting boxes with 60 mm center distance and 80x80 mm faceplate.
How do I clean the switch?
Wipe with a soft, dry cloth. Avoid water, solvents, or abrasive cleaners that may damage the surface.
Is the FR25L1 compatible with smart home systems?
No, this is a manual switch without smart features. For smart control, consider Hager's smart range.
What should I do if the switch feels warm?
A slightly warm surface is normal under full load. If it is hot, check for overloading or loose connections and consult an electrician.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com. It contains installation and safety instructions.
User questions about FR25L1 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual FR25L1 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FR25L1 by HAGER.
USER MANUAL FR25L1 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : FR25L1
Category : Switch