Fog Fury Jett Pro - Effect machine American DJ - Free user manual and instructions
Find the device manual for free Fog Fury Jett Pro American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fog Machine |
| Brand | American DJ |
| Model | Fog Fury Jett Pro |
| Power Supply | AC 120V / 60Hz |
| Power Consumption | 500 W |
| Dimensions (L x W x H) | 12 x 8 x 7 in (30.5 x 20.3 x 17.8 cm) |
| Weight | 5.5 lbs (2.5 kg) |
| Fluid Tank Capacity | 0.5 L |
| Heating Time | Approx. 3 minutes |
| Fog Output | Up to 1000 cu ft per minute |
| Control Methods | Manual, DMX, Wireless Remote |
| DMX Channels | 1 or 2 |
| Remote Included | Yes, wireless remote |
| Fuse | 5 A / 250 V |
| Cleaning | Use distilled water or cleaning fluid every 40 hours |
| Safety Features | Thermal cut-off, auto-shutoff when low fluid |
| Spare Parts | Heater, pump, fuse, nozzle available |
Frequently Asked Questions - Fog Fury Jett Pro American DJ
How do I connect the Fog Fury Jett Pro to DMX?
Use a standard DMX cable to connect the DMX In port to your controller. Set the DMX address using the DIP switches on the back. The unit uses 1 or 2 channels depending on mode.
What type of fog fluid should I use?
Use only water-based fog fluid designed for American DJ fog machines. Avoid oil-based fluids as they will damage the heater.
How long does the heating time take?
The Fog Fury Jett Pro heats up in approximately 3 minutes. The green LED will indicate when it's ready.
Can I use the machine without DMX?
Yes, you can use the included wireless remote for manual control. Simply press the button to output fog.
How do I clean the fog machine?
After every 40 hours of use, run a mixture of distilled water and fog machine cleaner through the system. This prevents clogging and extends heater life.
The machine stops producing fog. What should I check?
First, check if there is enough fluid in the tank. Then ensure the heater is fully warmed up. If still no fog, inspect the fuse and replace if blown (5A/250V). If problem persists, contact support.
Is the Fog Fury Jett Pro safe for indoor use?
Yes, but always ensure proper ventilation. Do not direct the fog at people or animals. The fog may trigger smoke detectors.
What is the maximum DMX cable length?
For reliable DMX control, keep cable length under 500 ft (150 m). Use a DMX terminator at the end of the chain.
How do I replace the fuse?
Unplug the machine. Locate the fuse holder on the rear panel, unscrew it, remove the old fuse, and insert a new 5A/250V fuse. Screw back the holder.
Can I use multiple Fog Fury Jett Pro units together?
Yes, you can daisy-chain them via DMX or use a DMX splitter. Each unit needs a unique DMX address.
User questions about Fog Fury Jett Pro American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Fog Fury Jett Pro - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fog Fury Jett Pro by American DJ.