EEK513P - Motion detector HAGER - Free user manual and instructions
Find the device manual for free EEK513P HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | Hager |
| Model | EEK513P |
| Detection Method | Passive Infrared (PIR) |
| Power Supply | 230 V AC, 50 Hz |
| Detection Angle | 180° |
| Detection Range | 12 m (at 25°C) |
| Recommended Mounting Height | 2.5 m |
| Adjustable Time Delay | 10 s – 10 min |
| Adjustable Light Threshold | 5 – 2000 lux |
| Standby Consumption | < 0.5 W |
| Connection Type | 3-wire (L, N, load) |
| Switched Power | 2300 W (incandescent) / 400 W (LED) |
| Protection Class | IP20 (indoor use) |
| Material | ABS plastic, white |
| Dimensions (H x W x D) | 110 x 80 x 60 mm |
| Weight | 150 g |
| Operating Temperature | -20°C to +40°C |
| Warranty | 2 years |
| Cleaning | Wipe with a dry cloth; do not use solvents. |
| Safety | Disconnect power before installation. Comply with local regulations. |
Frequently Asked Questions - EEK513P HAGER
What is the detection range of the Hager EEK513P?
The detection range is 12 meters at 25°C ambient temperature.
Can the sensitivity be adjusted?
Yes, the light threshold can be set from 5 to 2000 lux, and the time delay from 10 seconds to 10 minutes using the built-in potentiometers.
Is it suitable for outdoor use?
No, the EEK513P has IP20 protection, making it suitable only for indoor use.
How do I install the motion detector?
Mount the detector at a height of 2.5 m on a wall or ceiling. Connect the three wires (L, N, load) to the mains supply and the lighting load. Ensure power is disconnected before installation.
Does it have a override function?
Yes, you can override the automatic mode by switching the connected light on/off twice within 1 second. This forces the light to stay on for 4 hours or off until the next motion.
What causes false triggers?
False triggers can be caused by pets moving in the detection zone, heat sources like radiators, or reflections. Adjust the mounting angle and sensitivity to minimize these.
How do I clean the device?
Clean the lens with a soft dry cloth. Avoid solvents or abrasive cleaners that may damage the plastic.
What is the maximum load for LED lamps?
The maximum switched LED load is 400 W (typically up to 40 LED bulbs). For incandescent lamps, it is 2300 W.
Is the detector compatible with smart home systems?
The EEK513P is a standalone device and does not have smart connectivity. It works as a standard motion switch.
What should I do if the light stays on permanently?
Check the time delay setting (may be set too high) and the light threshold (set to daytime mode). Also ensure no continuous heat source (e.g., air conditioner) is in the detection area.
User questions about EEK513P HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual EEK513P - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EEK513P by HAGER.
USER MANUAL EEK513P HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : EEK513P
Category : Motion detector