RP8604 - Whiteboard BENQ - Free user manual and instructions
Find the device manual for free RP8604 BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Interactive Flat Panel Whiteboard |
| Model | BenQ RP8604 |
| Screen Size | 86 inches (diagonal) |
| Resolution | 4K UHD (3840 x 2160) |
| Touch Technology | Infrared touch, up to 20 touch points |
| Brightness | 450 cd/m² (typical) |
| Contrast Ratio | 4000:1 (typical) |
| Built-in Speaker | 2x 16W speakers |
| Connectivity | HDMI x3, USB 3.0 x5, VGA, RS232, LAN, Audio I/O |
| Wireless | Wi-Fi 802.11ac, Bluetooth 4.2 |
| Operating System | Android 8.0 (Oreo) with pre-installed BenQ EZWrite |
| Power Supply | AC 100-240V, 50/60Hz, Max 350W |
| Dimensions (W x H x D) | 1957 x 1160 x 95 mm |
| Weight | Approx. 75 kg (with stand) |
| VESA Mount | 800 x 600 mm |
| Cleaning Instructions | Use a soft dry cloth; avoid abrasive cleaners |
| Safety Features | Anti-glare glass, Kensington lock slot |
| Included Accessories | 2 x Touch pens, remote control, power cable, HDMI cable |
| Warranty | 3 years (standard) |
Frequently Asked Questions - RP8604 BENQ
How do I reset the BenQ RP8604 to factory settings?
Go to Settings > Backup & Reset > Factory Data Reset. Confirm and the device will restart.
Why is the touch not responding correctly?
Ensure no obstructions on the screen. Try recalibrating via Settings > Touch Calibration. If persists, restart the panel.
Can I connect a laptop to the RP8604?
Yes, use an HDMI cable from your laptop to any HDMI input. Press the HDMI button on the remote to select the correct source.
How do I clean the screen?
Turn off the device. Use a soft, lint-free cloth slightly dampened with water. Do not spray liquid directly. Avoid alcohol or ammonia cleaners.
What does the error 'No Signal' mean?
The selected input source is not active. Check if the connected device is powered on and securely plugged. Try a different HDMI port or cable.
How to update the firmware?
Connect to the internet. Go to Settings > About > System Update and check for updates. Download and install as prompted.
Can I mount the RP8604 on a wall?
Yes, using a VESA 800x600 mount. Ensure the wall can support the weight (75 kg). Follow the included mounting instructions.
How do I use the built-in whiteboard software?
Press the Whiteboard button on the remote or the front panel. Use the touch pens or fingers to write. Save or export via the toolbar.
What is the power consumption in standby?
Less than 0.5W in standby mode. Press the power button to turn off completely when not in use.
How to connect Bluetooth devices?
Go to Settings > Bluetooth, enable it, and select your device from the list. Pair if required. Confirm once connected.
User questions about RP8604 BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Whiteboard in PDF format for free! Find your manual RP8604 - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RP8604 by BENQ.
USER MANUAL RP8604 BENQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BENQ
Model : RP8604
Category : Whiteboard