FS60s - Sewing machine BROTHER - Free user manual and instructions
Find the device manual for free FS60s BROTHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sewing Machine |
| Brand | Brother |
| Model | FS60s |
| Dimensions (W x D x H) | 40.6 x 18.3 x 30.2 cm (16 x 7.2 x 11.9 in) |
| Weight | 7.5 kg (16.5 lbs) |
| Power Supply | 120 V, 60 Hz |
| Power Consumption | 60 W |
| Number of Stitches | 60 |
| Buttonhole Type | Automatic 1-step buttonhole |
| Stitch Width | Adjustable up to 7 mm |
| Stitch Length | Adjustable up to 5 mm |
| Needle Threader | Automatic |
| Bobbin Type | Top drop-in bobbin |
| Reverse Stitch | Yes |
| Speed Control | Variable by foot pedal |
| Free Arm | Yes |
| Lighting | LED lamp |
| Maintenance | Clean bobbin area and oil periodically |
| Safety Precautions | Unplug before cleaning and servicing |
| Spare Parts | Needles, bobbins, presser feet, belts |
| Repairability | User-serviceable parts accessible; professional service recommended for complex issues |
Frequently Asked Questions - FS60s BROTHER
How do I thread the needl on Brother FS60s?
1. Raise the presser foot. 2. Pass thread through top guides. 3. Down around the tension disk. 4. Up through take-up lever. 5. Down to needle, use automatic needle threader for ease.
Why does my machine skip stitches?
Common causes: wrong needle size, bent needle, improper threading, or tension too tight. Try replacing needle and rethreading with presser foot up.
How do I wind the bobbin?
Place thread on spool pin, pass through bobbin winder tension disc, wind clockwise a few times onto bobbin, push bobbin winder lever to left, press foot pedal. Stop when end.
How do I adjust thread tension?
Use the tension dial. For bobbin tension, adjust small screw on bobbin case. Test on scrap fabric. Balanced stitch: threads interlock in middle of fabric.
What type of needle does FS60s use?
Standard home sewing needles, commonly size 75/11 to 90/14. Use system HA x 1 needles. Always match needle to fabric.
How often should I oil my machine?
Every 8-10 hours of use or after each project. Use sewing machine oil, apply 1-2 drops to specified points (see manual). Do not over-oil.
Why is fabric not feeding?
Check if feed dogs are lowered (disengage for darning). Clean lint from feed dogs. Ensure stitch length is not zero. Check fabric thickness.
How to clean the bobbin area?
Turn off and unplug. Remove needle and presser foot. Open bobbin cover, remove bobbin and case. Use a soft brush to remove lint. Avoid compressed air.
How to use the one-step buttonhole?
Attach buttonhole foot, set stitch dial to buttonhole symbol, insert button in holder, lower foot, press reverse lever and sew slowly. Machine sews automatically.
Where can I find spare parts?
Authorized Brother dealers or online. Common parts: needles (standard HA x 1), bobbins (class 15), presser feet. Use genuine parts for best performance.
User questions about FS60s BROTHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual FS60s - BROTHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FS60s by BROTHER.