Eliminator Lighting

Mega Par Profile EP - Uncategorized Eliminator Lighting - Free user manual and instructions

Find the device manual for free Mega Par Profile EP Eliminator Lighting in PDF.

📄 30 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Eliminator Lighting Mega Par Profile EP - page 4
4 / 30
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED Par Can
Brand Eliminator Lighting
Model Mega Par Profile EP
Dimensions (L x W x H) 10.5 x 8.5 x 10.5 inches
Weight 5.5 lbs
Power Consumption 90W
Power Supply AC 100-240V, 50/60Hz
Light Source 12 x 10W hex LEDs (RGBA+UV)
Beam Angle 25°
DMX Control Yes, via 3-pin XLR
DMX Channels 6/10/12 selectable
Operating Modes DMX, Master/Slave, Sound Active, Auto
Remote Control IR remote included
Cooling Fan cooled
Safety Rating Indoor use only, dry location
Max Ambient Temperature 104°F (40°C)
Maintenance Clean lens with mild glass cleaner and soft cloth
Spare Parts Available LED boards, power supply, fan
Repairability Modular design, user-replaceable parts
Certifications CE, RoHS

Frequently Asked Questions - Mega Par Profile EP Eliminator Lighting

How do I set the DMX address on the Mega Par Profile EP?
Press the MENU button repeatedly until DMX Address appears on the display. Then use the UP and DOWN buttons to select the desired address. Press ENTER to confirm.
Can I use this fixture outdoors?
No, the Mega Par Profile EP is designed for indoor use only in dry locations. Do not expose it to rain or moisture.
How do I activate sound active mode?
Press the MENU button until Sound Active appears on the display. Press ENTER, then use UP/DOWN to select On and confirm with ENTER. The fixture will react to music via its built-in microphone.
What is the maximum number of fixtures I can daisy chain?
You can daisy chain up to 32 fixtures on a single DMX line using 3-pin XLR cables. Ensure proper termination at the last fixture.
How do I reset the fixture to factory defaults?
Press and hold the MENU button for 5 seconds until the display shows Reset. Release the button; the fixture will reset to default settings.
What type of power cable does the Mega Par Profile EP use?
It uses a standard IEC C14 power inlet. A power cord with an Edison plug is included for US markets.
The fixture is not responding to DMX. What should I check?
First, verify the DMX address is set correctly. Check that the DMX cable is properly connected and not damaged. Ensure the controller is set to the correct universe and that the fixture is in DMX mode (not master/slave).
Can I replace the LEDs myself?
Yes, the LED boards are user-replaceable. Disconnect power, remove the back cover, unplug the faulty board, and install a new one. Order replacement boards from Eliminator Lighting.
How do I clean the lens?
Use a mild glass cleaner and a soft lint-free cloth. Spray cleaner on the cloth, not directly on the lens, and wipe gently. Avoid abrasive cleaners.
What is the warranty period?
Eliminator Lighting offers a 1-year limited warranty from the date of purchase covering defects in materials and workmanship. Contact your dealer for warranty service.

User questions about Mega Par Profile EP Eliminator Lighting

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual Mega Par Profile EP - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mega Par Profile EP by Eliminator Lighting.

USER MANUAL Mega Par Profile EP Eliminator Lighting

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Eliminator Lighting

Model : Mega Par Profile EP

Category : Uncategorized