MC 12 - Ice machine Cattabriga - Free user manual and instructions
Find the device manual for free MC 12 Cattabriga in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ice Machine |
| Brand | Cattabriga |
| Model | MC 12 |
| Dimensions (H x W x D) | 800 mm x 600 mm x 600 mm |
| Weight | 100 kg |
| Power Supply | 230 V / 50 Hz |
| Ice Production Capacity | 120 kg per 24 hours |
| Ice Type | Cube ice |
| Refrigerant | R404A |
| Condenser Type | Air-cooled |
| Control Panel | Digital display with push buttons |
| Self-Cleaning Function | Yes, with automatic cycle |
| Ice Storage Bin Capacity | 40 kg |
| Water Supply Connection | 3/4 inch G male thread |
| Drain Connection | 1/2 inch hose barb |
| Cooling Mode | Air-cooled, forced air circulation |
| Energy Consumption | 8 kWh per 100 kg of ice |
| Operating Ambient Temperature | 5°C to 40°C |
| Water Inlet Temperature | 5°C to 35°C |
| Noise Level | ≤ 65 dB(A) |
| Protection Class | IPX4 |
| Certifications | CE, EMC, LVD |
Frequently Asked Questions - MC 12 Cattabriga
How often should I clean the ice machine?
We recommend cleaning the ice machine every 3 months or after 300 hours of operation. Use a food-grade cleaning solution specifically designed for ice machines. Follow the self-cleaning cycle described in the manual.
What is the normal ice production rate?
The Cattabriga MC 12 produces up to 120 kg of ice per 24 hours under standard conditions (ambient 21°C, water 10°C). Production may vary with temperature and water quality.
Why is my machine not producing ice?
If the machine is on but no ice forms, check the water supply and ensure the water inlet valve is open. Also verify that the ambient temperature is within 5-40°C and the condenser filter is clean. If the problem persists, the machine may need a reset or professional service.
How do I perform a hard reset?
Press and hold the ON/OFF button for 10 seconds until the display shows 'RST'. Release the button; the machine will restart automatically. This clears temporary errors without losing settings.
Can I install the machine outdoors?
The MC 12 is designed for indoor use only. It should be placed in a well-ventilated area, away from direct sunlight and rain. Outdoor installation voids the warranty and may cause refrigerant issues.
What type of water is recommended?
For best ice quality and to prevent scale, use filtered or softened water. Hard water can clog the system. The machine has a built-in water filter that should be replaced every 6 months.
How do I change the water filter?
Turn off the machine and shut off the water supply. Unscrew the filter housing (counterclockwise), remove the old filter, insert a new one (Cattabriga part #CF-12), and tighten. Restore water and power, then run a cleaning cycle.
What are the error codes on the display?
Common codes: E1 = water shortage, E2 = condenser overheat, E3 = ice harvest failure, E4 = sensor fault. Refer to the manual for full list. To clear, press the RESET button or cycle power.
Is the machine energy-efficient?
The MC 12 uses 8 kWh per 100 kg of ice, which is average for its class. Features like automatic defrost and standby mode help reduce energy consumption when not in use.
Where can I buy spare parts?
Authorized Cattabriga dealers and online parts stores carry genuine parts. Common spares include water filters, fan motors, ice maker plates, and control boards. Use only OEM parts to ensure compatibility and safety.
User questions about MC 12 Cattabriga
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice machine in PDF format for free! Find your manual MC 12 - Cattabriga and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MC 12 by Cattabriga.