SW-0501-HDBT - Hi-fi system WyreStorm - Free user manual and instructions
Find the device manual for free SW-0501-HDBT WyreStorm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 5x1 HDBaseT HDMI Switcher |
| Brand | WyreStorm |
| Model | SW-0501-HDBT |
| Category | Hi-fi System |
| Dimensions (W x D x H) | 435 x 200 x 44 mm (1U rackmount) |
| Weight | 2.0 kg |
| Power Supply | 12V DC, 2A |
| Inputs | 5 x HDMI (Type A) |
| Outputs | 1 x HDBaseT (RJ45), 1 x HDMI (loop-out) |
| Max Resolution | 4K@60Hz (4:4:4), 1080p@60Hz |
| HDMI Version | 2.0 with HDCP 2.2 |
| HDBaseT Distance | Up to 70m at 1080p, 40m at 4K |
| Control | IR, RS-232, Telnet, Front Panel |
| EDID Management | Built-in EDID emulation and learning |
| Audio Support | PCM, Dolby Digital, DTS, multichannel |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids. |
| Safety | Keep away from moisture and heat sources. Use only supplied power adapter. |
| Spare Parts | Power adapter, IR emitter, rack ears |
| Repairability | Professional repair only. No user-serviceable parts inside. |
Frequently Asked Questions - SW-0501-HDBT WyreStorm
How do I connect the SW-0501-HDBT to my display?
Use an HDBaseT transmitter/receiver pair. Connect the HDBaseT output (RJ45) to a compatible receiver connected to your display. For local output, use the HDMI loop-out port.
Can I control the switcher via IR?
Yes, the SW-0501-HDBT supports IR control. Use the included IR emitter and receiver to control switching from a remote location.
Does it support 4K resolution?
Yes, it supports 4K@60Hz with 4:4:4 chroma subsampling via HDBaseT. However, distance may be limited to 40m for 4K signals.
How do I switch between inputs?
You can switch using the front panel buttons, IR remote, RS-232 commands, or via Telnet over IP. Refer to the manual for command details.
What is the maximum cable length for HDMI inputs?
Standard HDMI cables up to 15m (50ft) are supported. For longer runs, use active HDMI cables or extenders.
Why is there no video output?
Check that all HDMI cables are securely connected. Verify the display is set to the correct input. Ensure the HDBaseT receiver is powered and linked. Try a different input source.
Can I control the device with a computer?
Yes, connect via RS-232 (DB9) or Ethernet (Telnet). Use WyreStorm's control software or third-party control systems like Crestron or Extron.
Does it support audio extraction?
No built-in audio extraction. Audio is transmitted via HDMI. If needed, use an external audio extractor at the source or display.
What is the HDBaseT standard used?
The device uses HDBaseT Class A (HDBT). It is compatible with standard HDBaseT receivers. Do not use with PoE unless specified.
How do I reset the unit to factory defaults?
Press and hold the 'Menu' button on the front panel for 10 seconds until the unit resets. All settings will be cleared.
User questions about SW-0501-HDBT WyreStorm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-fi system in PDF format for free! Find your manual SW-0501-HDBT - WyreStorm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SW-0501-HDBT by WyreStorm.