SuperServer E300-9D-8CN8TP - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer E300-9D-8CN8TP Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Embedded Server |
| Brand | Supermicro |
| Model | SuperServer E300-9D-8CN8TP |
| Form Factor | Compact Mini-ITX |
| Dimensions (W x D x H) | 9.6 x 9.6 x 1.7 inches (244 x 244 x 43 mm) |
| Weight | Approximately 6.6 lbs (3 kg) |
| Power Supply | 12V DC input, 120W AC adapter (included) |
| Processor | Intel Xeon D-2100 series (SoC) |
| Memory | 4 x DDR4 ECC RDIMM slots, up to 256GB |
| Storage | 2 x 2.5" SATA3 drive bays, 1 x M.2 NVMe |
| Networking | 8 x 10GbE (SFP+, Intel X553), 2 x 1GbE (RJ45) |
| Expansion Slots | 1 x PCI-E 3.0 x8 (FHHL), 1 x M.2 WiFi |
| Management | IPMI 2.0 with dedicated LAN |
| USB Ports | 2 x USB 3.0, 1 x USB 2.0 (internal) |
| Video Output | 1 x VGA (onboard BMC) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Certifications | FCC, CE, UL, RoHS |
| Cleaning Instructions | Use dry compressed air; avoid liquids. Clean filters monthly. |
| Safety Warnings | Disconnect power before servicing. Do not block vents. |
| Repairability | Modular components: replaceable PSU, storage, RAM, fan. |
| Spare Parts Availability | Contact Supermicro authorized resellers for spare parts. |
Frequently Asked Questions - SuperServer E300-9D-8CN8TP Supermicro
What is the power consumption of the SuperServer E300-9D-8CN8TP?
The typical power consumption is 60-80W under load, depending on configuration. It uses a 120W external AC adapter.
How do I access the IPMI web interface?
Connect to the dedicated IPMI LAN port. The default IP is 192.168.1.2 with username admin and password admin. Change immediately for security.
Can I install a GPU in this server?
Yes, it has one PCI-E 3.0 x8 slot (full-height, half-length). A low-power GPU like NVIDIA T4 or GTX 1650 can be installed, but ensure power budget.
What type of memory is compatible?
It supports DDR4 ECC RDIMM modules up to 2666MHz. Unbuffered ECC and non-ECC are not supported. Maximum capacity is 256GB.
How to perform a factory reset?
To reset, short the CMOS clear jumper (JBT1) on the motherboard while power is off. Then power on and load default BIOS settings.
Does it support RAID?
The onboard SATA controller supports RAID 0, 1, 5, 10 via Intel RSTe. For hardware RAID, use the PCIe slot with a RAID card.
What is the maximum storage capacity?
Using two 2.5" SATA drives (up to 2TB each) and one M.2 NVMe (up to 2TB), total raw capacity up to 6TB.
How to update the BIOS?
Download the latest BIOS from Supermicro website. Use the SumaFlash utility or the IPMI web interface under Firmware Update. Reboot after update.
Is the server fanless?
No, it has one 4cm fan for active cooling. It is relatively quiet but not silent. For near-silent operation, consider a fanless model.
What operating systems are supported?
It supports Windows Server 2019/2022, Ubuntu 20.04/22.04, VMware ESXi 7.0/8.0, and other Linux distributions. Check Supermicro's compatibility list.
User questions about SuperServer E300-9D-8CN8TP Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer E300-9D-8CN8TP - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer E300-9D-8CN8TP by Supermicro.