FP 10000Q - Receiver Lab Gruppen - Free user manual and instructions
Find the device manual for free FP 10000Q Lab Gruppen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4-Channel Power Amplifier |
| Brand | Lab Gruppen |
| Model | FP 10000Q |
| Category | Receiver / Amplifier |
| Rack Size | 19 inches, 2U |
| Dimensions (W x H x D) | 483 x 88 x 420 mm |
| Weight | 19.5 kg |
| Power Consumption | 3600 VA |
| Amplifier Class | Class TD |
| Output Power (per channel) | 2 x 5000 W @ 2 ohms, 2 x 2500 W @ 4 ohms, 4 x 1400 W @ 4 ohms |
| Frequency Response | 2 Hz - 40 kHz |
| Input Sensitivity | 1.5 V / 8 ohms |
| Cooling | Variable speed fan, front-to-back airflow |
| Network Interface | NomadLink network for monitoring and control |
| Protection Features | Short circuit, thermal, DC, overload, and limiter |
| Front Panel | Power switch, level controls, indicators (signal, limit, protect) |
| Connectors Input | XLR-3 female balancing, XLR-3 male loop out |
| Connectors Output | NL4 Speakon |
| Mains Voltage | 100-240 V AC, 50-60 Hz |
| Idle Consumption | < 100 W |
| Operating Temperature | 0°C to 40°C |
| Cleaning | Use dry cloth; avoid liquids; clean air filters regularly |
| Maintenance | Check ventilation; replace filters if needed; no user-serviceable parts inside |
| Safety Compliance | CE, UL, ETL, RoHS |
| Spare Parts & Repairability | Contact authorized service centers; use genuine parts |
| General Information | Professional audio amplifier for touring and installation |
Frequently Asked Questions - FP 10000Q Lab Gruppen
What is the maximum output power of the FP 10000Q?
The FP 10000Q delivers up to 5000 W per channel when bridged into 2 ohms, or 2500 W per channel into 4 ohms, and can output 1400 W per channel in 4-channel mode at 4 ohms.
How do I connect the FP 10000Q to a network?
Use the NomadLink network interface via RJ45 connectors. Connect to a compatible controller (e.g., NomadLink Control Software or Lake Controller) for monitoring and remote control.
What are the recommended rack mounting guidelines?
Mount the amplifier in a 19-inch rack using the included rack ears. Ensure 2U space is available and adequate ventilation with at least 1U clearance above and below. Avoid stacking units directly on top of each other.
How should I clean the amplifier?
Use a soft dry cloth to wipe the exterior. Do not use liquids or solvents. Clean the front air filter periodically with a vacuum or gentle compressed air. Never open the chassis.
What protection features does the FP 10000Q have?
The amplifier includes short circuit protection, thermal protection, DC offset protection, overload limiting, and mains inrush current limiting. The front panel shows Limit and Protect indicators.
What type of speakers can I connect?
Connect speakers with impedance ratings of 2 ohms or higher per channel. Use NL4 Speakon connectors for output. For bridged operation, connect the speaker across the positive terminals of a channel pair.
How do I troubleshoot if the Protect LED lights up?
If the Protect LED illuminates, disconnect the speaker load and power cycle. If it persists, check for short circuits in speaker wiring or overheating. Ensure proper ventilation and that the impedance is within limits. If problem continues, contact Lab Gruppen service.
What is the power consumption at idle?
At idle, the FP 10000Q consumes less than 100 W thanks to its efficient Class TD design.
Can I use the FP 10000Q in a mobile setup?
Yes, the amplifier is designed for tour and installation. It features a robust steel chassis, shock-resistant components, and front-to-back airflow that works well in mobile racks. Secure it properly during transport.
Where can I find spare parts or service?
Contact an authorized Lab Gruppen service center. Use only genuine spare parts to maintain safety and performance. The user manual includes a list of service centers or visit the Lab Gruppen website.
User questions about FP 10000Q Lab Gruppen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual FP 10000Q - Lab Gruppen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FP 10000Q by Lab Gruppen.