MOD 3000TL3-X - Solar panel Growatt - Free user manual and instructions
Find the device manual for free MOD 3000TL3-X Growatt in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Grid-Tie Solar Inverter |
| Model | MOD 3000TL3-X |
| Brand | Growatt |
| Rated Power | 3000 W |
| Maximum Input Voltage | 1100 V DC |
| MPPT Voltage Range | 150 V - 1000 V |
| Number of MPPT Trackers | 2 |
| Output Type | Three-Phase |
| Rated Output Voltage | 230/400 V AC |
| Maximum Efficiency | 98.2% |
| European Efficiency | 97.5% |
| Dimensions (W x H x D) | 370 x 490 x 170 mm |
| Weight | 16 kg |
| Ingress Protection | IP65 |
| Cooling Method | Natural Convection |
| Display | LCD with touch buttons |
| Communication | RS485, Wi-Fi (optional) |
| Protection Features | Overvoltage, overcurrent, islanding, reverse polarity, ground fault |
| Warranty | 5 years (extendable) |
| Operating Temperature Range | -25°C to +60°C |
| Compliance | IEC 61727, IEC 62109, VDE 0126-1-1 |
Frequently Asked Questions - MOD 3000TL3-X Growatt
What is the maximum PV array power this inverter can handle?
The Growatt MOD 3000TL3-X can handle a maximum PV array power of up to 4500 W under standard test conditions. It is recommended to follow the sizing guidelines in the manual.
Is this inverter suitable for residential three-phase systems?
Yes, the MOD 3000TL3-X is designed for three-phase grid connections (230/400 V AC). It is ideal for residential or small commercial solar installations.
How do I connect the inverter to monitoring?
The inverter comes with an RS485 communication port. You can also purchase an optional Wi-Fi module to enable remote monitoring via the Growatt ShinePhone app.
What is the recommended maintenance schedule?
Regularly inspect the inverter for dust and debris. Clean the heatsink and vents with a soft brush or compressed air. Check all cable connections annually. Refer to the manual for detailed maintenance instructions.
Does the MOD 3000TL3-X have built-in arc fault protection?
Yes, this model includes integrated arc fault detection (AFCI) to ensure safety by detecting and interrupting arcs in the PV system.
What are the required clearance distances for installation?
Ensure at least 300 mm clearance above and below the inverter for proper cooling, and 100 mm on the sides. Do not install in direct sunlight or near flammable materials.
Can the inverter be used with batteries?
No, the MOD 3000TL3-X is a grid-tie inverter and does not have battery charging capabilities. For battery storage, consider hybrid models like the Growatt SPH series.
What is the noise level of this inverter?
The MOD 3000TL3-X is fanless and operates with natural convection cooling, so it is virtually silent, making it suitable for noise-sensitive environments.
How do I reset the inverter after a fault?
First, disconnect the AC and DC power sources. Wait at least 5 minutes for the internal capacitors to discharge. Then reconnect power. If the fault persists, check the error code on the LCD and refer to the troubleshooting section in the manual.
What is the efficiency at low load (20% of rated power)?
The inverter maintains high efficiency even at low loads. At 20% of rated power, the efficiency is typically above 96%, making it efficient during partially cloudy conditions or low sunlight.
User questions about MOD 3000TL3-X Growatt
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Solar panel in PDF format for free! Find your manual MOD 3000TL3-X - Growatt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MOD 3000TL3-X by Growatt.