SAP-512 MK2 - Uncategorized Eurolite - Free user manual and instructions
Find the device manual for free SAP-512 MK2 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DMX Lighting Controller |
| Model | SAP-512 MK2 |
| Brand | Eurolite |
| Dimensions (WxHxD) | 482 x 88 x 240 mm (19", 2U) |
| Weight | 3.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 12 W |
| DMX Channels | 512 (1 universe) |
| Preset Scenes | 12 |
| Chase Programs | 6 |
| Display | 2x16 character LCD, backlit |
| Faders | 12 channel faders (15 mm) |
| DMX Connector | XLR 5-pin output |
| MIDI Support | MIDI In (5-pin DIN) |
| Blackout Button | Yes |
| Flash Buttons | 12 |
| Mounting | 19" rack mount (brackets included) |
| Operating Temperature | 5°C to 40°C |
| Maintenance | Clean with dry cloth; no solvents |
| Safety | Use in dry locations; avoid moisture |
| Spare Parts | Fuse, power cord, rack ears |
| Repairability | Replaceable faders, power supply module |
Frequently Asked Questions - SAP-512 MK2 Eurolite
How do I connect the SAP-512 MK2 to my lighting fixtures?
Use a standard DMX cable with 5-pin XLR connectors. Connect the controller's DMX output to the first fixture's input, then daisy-chain to subsequent fixtures. Ensure the cable is properly terminated with a 120Ω resistor at the last fixture.
How do I program a scene on the SAP-512 MK2?
Press the Program button, then use the faders to set desired channel levels. Press Scene and select a scene number (1-12) to store. Exit program mode by pressing Program again.
Can I use the SAP-512 MK2 to control moving heads?
Yes, the SAP-512 MK2 can control any DMX-compatible device, including moving heads. You will need to refer to the fixture's manual for channel mapping and assign the appropriate channels on the controller.
How do I create a chase sequence?
Enter Program mode, select a chase (1-6) using the Chase button. Program each step by adjusting faders and pressing Step. Set speed and fade time using the Speed and Fade controls. Exit program mode to run the chase.
Why is my DMX signal not being received by fixtures?
Check the DMX cable connections: ensure it's plugged into the output of the controller and input of the first fixture. Verify that the cable is not damaged and is properly terminated. Also confirm the DMX address settings on the fixtures match the controller's output.
How do I set the DMX address of a fixture?
Set the DMX address using the fixture's menu or DIP switches. The address assigned to the first channel of that fixture should match the corresponding channel number on the SAP-512 MK2. For example, if you use channel 1, set the fixture to address 001.
Can I operate the SAP-512 MK2 without connecting to a computer?
Yes, the SAP-512 MK2 is a standalone DMX controller. It does not require a computer for operation. You program scenes and chases directly on the unit and run them independently.
What does the Blackout button do?
The Blackout button instantly sets all DMX channels to zero, turning off all connected lights. Pressing it again restores the previous state. This is useful during emergencies or breaks.
How do I reset the SAP-512 MK2 to factory defaults?
To reset, turn off the unit, then press and hold the Program and Blackout buttons simultaneously while powering on. Release the buttons when the display shows 'Factory Reset'. Confirm by pressing Enter.
What type of fuse does the SAP-512 MK2 use?
The SAP-512 MK2 uses a 5x20 mm glass fuse rated at T0.5A/250V. Always replace with the same type and rating to avoid damage. The fuse holder is located near the power inlet.
User questions about SAP-512 MK2 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SAP-512 MK2 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SAP-512 MK2 by Eurolite.
USER MANUAL SAP-512 MK2 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : SAP-512 MK2
Category : Uncategorized