12PX HEX PEARL - Effect machine Adj - Free user manual and instructions
Find the device manual for free 12PX HEX PEARL Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Effect Machine (LED Lighting Effect) |
| Brand | Adj |
| Model | 12PX HEX PEARL |
| Dimensions (approx) | 300 x 200 x 150 mm |
| Weight (approx) | 2 kg |
| Power Supply | AC 100-240V, 50/60 Hz |
| Power Consumption (approx) | 100 W |
| Light Source | 12 x 6W HEX (RGBWA+UV) LEDs |
| Control Protocol | DMX512, Auto, Sound Active, Master/Slave |
| DMX Channels | 8 or 12 selectable channels |
| Operating Modes | Static color, Color macro, Strobe, Dimmer, Sound activation |
| Beam Angle | 25° (approx) |
| Housing Material | Aluminum and plastic |
| Cooling | Convection (fanless) |
| Mounting Options | Floor stand mounting bracket (included) |
| Protection Rating | IP20 (indoor use only) |
| Maintenance | Clean lens with soft cloth; avoid moisture |
| Safety | Not for children under 3; avoid direct eye exposure |
| Spare Parts & Repairability | LED modules replaceable; contact service center |
| Included Accessories | Power cord, user manual, mounting bracket |
Frequently Asked Questions - 12PX HEX PEARL Adj
How do I connect the 12PX HEX PEARL to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX IN of the fixture to the DMX OUT of your controller. Set the DMX address using the menu buttons on the display. Consult the manual for channel mapping.
How can I reset the fixture to factory defaults?
Press the MENU button until you see 'RESET' or 'FACTORY DEFAULT', then press ENTER. The fixture will revert to default settings. This clears any custom DMX addresses or mode settings.
Can I use the fixture in sound-activated mode?
Yes. Press MODE until you see 'SND' or 'SOUND' on the display. The built-in microphone will trigger light changes based on music. Adjust the sensitivity via the MENU if needed.
What is the maximum number of fixtures I can daisy-chain?
You can daisy-chain up to 32 fixtures on a DMX line. For longer chains, use a DMX splitter to avoid signal degradation. Ensure the last fixture has a termination resistor or use a terminator plug.
How to replace a blown fuse?
Disconnect the power. Locate the fuse holder near the power input. Use a small screwdriver to open the cap. Replace the fuse with one of the same rating (typically T2A/250V). Reconnect power.
Why is the fixture not responding to sound?
Check if the sound sensitivity is set too low. Increase it via the MENU. Also ensure the microphone hole is not blocked by dust. If using in a quiet environment, try a different mode.
How do I clean the lenses?
Use a dry, soft microfiber cloth. Gently wipe the lens surface in circular motions. Avoid any liquid cleaners or abrasive materials. Clean when the fixture is off and cool.
What should I do if an LED stops working?
Contact technical support or an authorized service center. The LED modules are replaceable but require opening the fixture. Do not attempt repairs yourself if under warranty.
Can I use the fixture outdoors?
The fixture is rated IP20 for indoor use only. Exposure to rain, moisture, or extreme temperatures may damage internal components. Always use in a dry, well-ventilated area.
What is the recommended mounting height?
For best effect, mount the fixture between 2 and 4 meters high. Ensure the mounting bracket is securely fastened to a stable support. Keep at least 50 cm clearance from combustible materials.
User questions about 12PX HEX PEARL Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual 12PX HEX PEARL - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 12PX HEX PEARL by Adj.