BTR-STP200 - Battery charger YAMAHA - Free user manual and instructions
Find the device manual for free BTR-STP200 YAMAHA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger |
| Brand | Yamaha |
| Model | BTR-STP200 |
| Input Voltage | 100-240 V AC, 50/60 Hz |
| Output Voltage | 12 V DC |
| Charging Current | 2 A |
| Battery Types | Lead-acid (standard, AGM, gel) |
| Dimensions (L x W x H) | 170 x 70 x 45 mm |
| Weight | 300 g |
| Charging Modes | Automatic charging, maintenance, desulfation |
| Safety Features | Reverse polarity protection, overcharge protection, short circuit protection |
| Operating Temperature | -20°C to 50°C |
| IP Rating | IP65 |
| Cable Length | 1.5 m |
| LED Indicators | Power, charging, fully charged, error |
| Mounting | Wall-mountable |
| Compliance | CE, RoHS |
| Maintenance | Keep dry, clean contacts, store in cool place |
| Repairability | Fuse replaceable; otherwise sealed unit |
| Included Accessories | AC power cord, battery clamps, eyelet terminals |
Frequently Asked Questions - BTR-STP200 YAMAHA
What type of battery can I charge with the Yamaha BTR-STP200?
The Yamaha BTR-STP200 is designed for 12V lead-acid batteries including standard flooded, AGM, and gel types.
Can I leave the charger connected indefinitely?
Yes, the BTR-STP200 has a maintenance mode that automatically switches to float charging once the battery is full, allowing long-term connection.
How do I know when the battery is fully charged?
The charger has a green LED indicator that lights up when the battery is fully charged. The charger will then enter maintenance mode.
What is the charging current?
The charging current is 2A, suitable for maintaining and charging small to medium 12V batteries.
Does the charger have reverse polarity protection?
Yes, it includes reverse polarity protection to prevent damage if the clamps are connected incorrectly.
Can it charge a completely dead battery?
The charger can attempt to charge batteries with very low voltage, but if the voltage is below 3V, it may not detect the battery. In such cases, a manual boost might be needed.
Is the BTR-STP200 waterproof?
It has an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets, but it should not be submerged.
How long does it take to charge a battery?
Charging time depends on battery capacity. For a typical 12Ah battery, it takes about 6-7 hours from empty to full.
Can I use this charger for my car battery?
It can be used for maintaining a car battery, but for deeply discharged large car batteries (e.g., 60Ah), a higher current charger is recommended.
What should I do if the error LED is on?
The error LED indicates a fault such as short circuit, reverse polarity, or battery voltage too high. Disconnect and check connections and battery condition.
User questions about BTR-STP200 YAMAHA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual BTR-STP200 - YAMAHA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BTR-STP200 by YAMAHA.