Entour Venue - Effect machine Adj - Free user manual and instructions
Find the device manual for free Entour Venue Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fog machine |
| Brand | Adj |
| Model | Entour Venue |
| Dimensions (L x W x H) | 15 x 10 x 10 inches |
| Weight | 10.5 lbs |
| Power Consumption | 500 W |
| Voltage | 120V / 60Hz |
| Fluid Tank Capacity | 1 liter |
| Max Output | 5,000 cfm |
| Warm-up Time | 3 minutes |
| Control Methods | Manual, DMX, remote control |
| DMX Channels | 1 |
| Housing Material | High-impact plastic |
| Cooling System | Fan-assisted |
| Recommended Fluid | Adj Fog Juice (water-based) |
| Safety Features | Thermal overload protection, auto-off |
| Maintenance | Regular cleaning of nozzle and tank; use distilled water for flushing |
| Spare Parts Availability | Heater, pump, fan, DMX board available |
| Warranty | 1 year limited |
| Certifications | ETL, CE |
Frequently Asked Questions - Entour Venue Adj
What type of fluid should I use in the Entour Venue?
Use only Adj brand water-based fog fluid. Other fluids may clog the machine or produce unsafe fumes.
How do I clean the fog machine?
Run a mixture of 80% distilled water and 20% white vinegar through the machine for 10 minutes, then flush with distilled water. Follow the manual for detailed steps.
Can I use this machine outdoors?
Yes, but avoid wind and rain. The fog output may dissipate quickly in outdoor conditions.
What is the warm-up time?
The warm-up time is approximately 3 minutes. The machine will indicate readiness via a green LED.
How do I control the machine via DMX?
Connect a DMX controller to the 3-pin XLR input. Set the DMX address using the DIP switches. The machine uses 1 DMX channel for fog output.
What is the maximum distance the fog can reach?
The fog can project up to 15 feet horizontally, depending on ventilation.
Why is the machine not producing fog?
Check that the fluid tank is full, the machine is fully warmed up, and the nozzle is not clogged. Also ensure the thermal overload hasn't tripped.
How often should I descale the machine?
Descale every 20 hours of use or monthly, whichever comes first, to prevent mineral buildup.
Is the machine safe to leave unattended?
No, do not leave any fog machine unattended while operating. Always follow safety guidelines and turn off when not in use.
Where can I find spare parts?
Contact Adj customer support or authorized dealers for replacement heater elements, pumps, fans, and DMX boards.
User questions about Entour Venue Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Entour Venue - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Entour Venue by Adj.