PAL 1200 FX - Uncategorized MARTIN - Free user manual and instructions
Find the device manual for free PAL 1200 FX MARTIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Profile Spot |
| Lamp Type | 1200 W Discharge Lamp |
| Color Temperature | 6000 K |
| Beam Angle | 10° - 46° Motorized Zoom |
| Control Protocol | DMX512-A, RDM |
| DMX Channels | 21 / 27 / 33 (Selectable) |
| Movement Range | Pan: 540°, Tilt: 270° |
| Color System | CMY + CTB + Color Wheel (6 interchangeable filters) |
| Gobo System | Rotating Gobos (7 + open) + Animation Wheel |
| Shutter & Dimmer | Electronic strobe, 0-100% linear dimming |
| Input Voltage | 200-240 V AC, 50/60 Hz |
| Power Consumption | 1450 VA |
| Weight | 32.5 kg |
| Dimensions (L x W x H) | 500 x 420 x 680 mm |
| Cooling System | Variable speed fans, noise optimized |
| Safety Features | Automatic power-off on overheating, safety cable attachment |
| Housing Material | Metal with impact-resistant plastic |
| IP Rating | IP20 (indoor use only) |
| Maintenance | Lamp replacement every 750 hours; clean air filters monthly |
| Spare Parts Availability | Modules and components replaceable by qualified personnel; contact Martin support |
Frequently Asked Questions - PAL 1200 FX MARTIN
How to set the DMX address on the PAL 1200 FX?
Use the control panel menu: navigate to 'DMX Address' and set the desired address using the up/down buttons. Confirm with 'Enter'.
What type of lamp does the fixture use?
It uses a 1200 W discharge lamp with a rated life of approximately 750 hours.
Can I control the fixture without DMX?
Yes, you can use the standalone mode with built-in programs or control via RDM for remote monitoring.
How do I clean the front lens?
Use a soft lint-free cloth with a mild glass cleaner. Avoid abrasive materials and do not spray directly on the fixture.
Why is the fixture not responding to DMX?
Check the DMX cable connections and ensure the terminator is installed on the last fixture. Verify the DMX address and that the controller is sending data.
What is the maximum ambient temperature for operation?
The fixture can operate in ambient temperatures up to 40°C (104°F). Ensure adequate ventilation.
How to replace the gobo?
Disconnect power and remove the gobo module. Unclip the old gobo and insert the new one with the coated side facing the lamp. Reinstall the module.
Does the fixture support RDM?
Yes, it supports RDM (Remote Device Management) for fixture identification and configuration changes.
What safety precautions should I take?
Always use a safety cable attached to the fixture's rigging points. Install a secondary truss clamp. Do not operate with damaged cables.
How to update the firmware?
Firmware updates are performed via DMX/RDM using Martin's Uploader software. Connect a PC to the DMX chain and follow the update procedure in the manual.
User questions about PAL 1200 FX MARTIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PAL 1200 FX - MARTIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PAL 1200 FX by MARTIN.
USER MANUAL PAL 1200 FX MARTIN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MARTIN
Model : PAL 1200 FX
Category : Uncategorized