SRX910LA - Speaker JBL - Free user manual and instructions
Find the device manual for free SRX910LA JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Line Array Loudspeaker |
| Brand | JBL |
| Model | SRX910LA |
| Dimensions (H x W x D) | 380 mm x 600 mm x 380 mm (15.0 in x 23.6 in x 15.0 in) |
| Weight | 25.4 kg (56.0 lbs) |
| Frequency Response (-10 dB) | 55 Hz - 19 kHz |
| Frequency Range (±3 dB) | 70 Hz - 17 kHz |
| Coverage Pattern | 90° x 10° (H x V) |
| Maximum SPL | 137 dB peak |
| Power Handling (AES) | 500 W continuous, 2000 W peak |
| Impedance | 16 ohms |
| Sensitivity (1W/1m) | 98 dB |
| Low-Frequency Driver | 1 x 10 inch (254 mm) woofer |
| High-Frequency Driver | 1 x 1.5 inch (38 mm) compression driver |
| Enclosure Material | Plywood with black DuraFlex finish |
| Grille | Powder-coated, perforated steel with acoustically transparent cloth |
| Connectors | 2 x Neutrik NL4 Speakon (input & link) |
| Rigging | Integrated flying hardware, captive pins, and track fittings |
| Application | Live sound reinforcement, portable PA, installed systems |
| Minimum Impedance | 12 ohms |
| Crossover Frequency | 2.5 kHz (passive) |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
Frequently Asked Questions - SRX910LA JBL
How do I properly rig the JBL SRX910LA speaker?
Use the integrated flying hardware with captive pins. Ensure you use proper grade rigging components and follow local safety regulations. Consult the user manual for detailed rigging instructions and weight limits.
What amplifier power is recommended for the SRX910LA?
Use an amplifier capable of delivering between 500 W and 2000 W into 16 ohms per cabinet. Ensure the amplifier is configured for the correct load and has appropriate headroom.
Can I use the SRX910LA as a floor monitor?
The SRX910LA is designed as a line array element for flown or ground-stacked arrays. While it can be used on the floor, its dispersion pattern (90°x10°) is optimized for vertical arrays. For stage monitoring, consider a dedicated wedge.
What is the correct way to connect multiple SRX910LA cabinets?
Use the NL4 Speakon connectors. For daisy-chaining, connect the amplifier to the 'Input' connector of the first cabinet, then use the 'Link' connector to feed the next cabinet. Ensure total impedance does not drop below amplifier's minimum rating.
How do I clean and maintain the JBL SRX910LA?
Wipe the enclosure with a damp cloth using mild soap. Do not use abrasive cleaners. Inspect the grille and drivers periodically. Keep connectors clean and protected from moisture.
What is the maximum SPL of the SRX910LA?
The maximum peak SPL is 137 dB. Continuous SPL is lower, typically around 131 dB at rated power.
What type of speaker cable should I use?
Use a high-quality, heavy-gauge speaker cable (at least 14 AWG for runs up to 50 ft, thicker for longer runs) with NL4 Speakon connectors to ensure reliable performance.
Can the SRX910LA be used outdoors?
Yes, the enclosure is designed for weather-resistant use, but it is not waterproof. Protect from rain and extreme humidity. Do not expose to direct sunlight for extended periods.
What is the warranty coverage for JBL SRX910LA?
JBL typically offers a 5-year limited warranty for passive loudspeakers. Coverage excludes damage from misuse, improper rigging, or unauthorized modifications. Check your local warranty terms.
How do I transport the SRX910LA safely?
Use padded flight cases or covers designed for the SRX910LA. Secure cabinets properly in a vehicle to prevent shifting. Avoid stacking heavy objects on top of the speakers.
User questions about SRX910LA JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual SRX910LA - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SRX910LA by JBL.