PA 502 - Speaker The Box - Free user manual and instructions
Find the device manual for free PA 502 The Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active PA Speaker |
| Dimensions (W x H x D) | 300 x 500 x 300 mm |
| Weight | 15 kg |
| Power Rating | 500 W Peak |
| Frequency Response | 50 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Sensitivity | 98 dB |
| Drivers | 15" Woofer, 1.75" Tweeter |
| Input Connectors | XLR, 1/4" Jack |
| Output Connectors | XLR Link |
| Material | Plywood Cabinet |
| Finish | Black Textured Paint |
| Grille | Steel Mesh |
| Handles | 2 Side Handles |
| Pole Mount | 35 mm |
| Flying Points | M10 |
| Protection | Overload, Thermal |
| Cooling | Passive |
| Power Supply | AC 110-240 V, 50/60 Hz |
| Accessories | Power Cord, User Manual |
| Maintenance | Clean with dry cloth |
| Safety | Do not expose to moisture |
| Repairability | Contact authorized service center |
Frequently Asked Questions - PA 502 The Box
How do I connect the PA 502 to a mixer?
Use a balanced XLR cable from the mixer output to the PA 502 input. Ensure the speaker is powered off during connection.
Can I use the PA 502 as a floor monitor?
Yes, the PA 502 can be placed on its side as a wedge monitor. Ensure stability and avoid blocking the rear ports.
What is the maximum safe volume level?
Avoid prolonged operation at maximum volume to prevent driver damage. Watch for distortion as a sign of overloading.
How do I clean the speaker grille?
Use a soft brush or vacuum with a brush attachment to remove dust. For stubborn dirt, gently wipe with a damp cloth.
Does the PA 502 have Bluetooth connectivity?
No, the PA 502 is a wired active speaker. It requires analog audio input via XLR or jack.
How do I mount the speaker on a tripod stand?
Insert the pole of the stand into the 35 mm pole mount on the bottom of the speaker. Tighten the adjustment knob securely.
What should I do if the speaker produces no sound?
Check power, input cable, and volume settings. Test with another audio source. If still silent, consult a technician.
Can I daisy-chain multiple PA 502 speakers?
Yes, use the XLR Link output to connect to the next speaker. Ensure total impedance does not exceed the amplifier's rating.
Is the PA 502 suitable for outdoor use?
It is designed for indoor use. Protect from rain and extreme temperatures. Use a cover if outdoors temporarily.
How do I replace a blown fuse?
Disconnect power, locate the fuse holder near the power inlet, replace with the same type and rating (e.g., T 5A / 250V).
User questions about PA 502 The Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual PA 502 - The Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PA 502 by The Box.