RX-V1083 - Receiver YAMAHA - Free user manual and instructions
Find the device manual for free RX-V1083 YAMAHA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | AV Receiver |
| Marque | Yamaha |
| Modèle | RX-V1083 |
| Canaux | 7.2 (7 surround channels + 2 subwoofer outputs) |
| Puissance de sortie | 100 W per channel (8 ohms, 20 Hz - 20 kHz, 0.09% THD) |
| Formats audio pris en charge | Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio |
| Fonctions réseau | Wi-Fi, Bluetooth, Ethernet, AirPlay 2, Spotify Connect |
| Compatibilité vidéo | 4K/60p, HDR10, Dolby Vision, HLG, 4K scaling |
| Entrées HDMI | 7 (incl. 1 front), 4K/60p, HDCP 2.2 |
| Sorties HDMI | 2 (Zone 1, Zone 2), ARC |
| Entrées audio numériques | 2 optiques, 2 coaxiales |
| Entrées audio analogiques | 4 (RCA, phono MM) |
| Sorties préamplificateur | 2 subwoofers, Zone 2/3 ligne |
| Dimensions (L x H x P) | 435 x 186 x 430 mm |
| Poids | 15.5 kg |
| Consommation électrique | 500 W (max), 0.1 W (standby) |
| Alimentation | AC 120 V/60 Hz ou 220 V/50 Hz |
| Entretien | Nettoyer avec un chiffon sec et doux. Ne pas utiliser de solvants. |
| Sécurité | Ne pas exposer à l'humidité ou à une chaleur excessive. Débrancher avant nettoyage. |
| Accessoires inclus | Télécommande, piles, antenne FM/AM, câble micro YPAO, manuel |
| Réparabilité | Pièces détachées disponibles via service agréé Yamaha |
Frequently Asked Questions - RX-V1083 YAMAHA
How do I connect my TV to the Yamaha RX-V1083?
Use an HDMI cable to connect the HDMI output (ARC) on your TV to the HDMI OUT (ARC) port on the receiver. Ensure both devices support ARC and enable CEC in settings.
How do I set up the speakers for a 5.1 or 7.1 system?
Connect speaker wires to the corresponding terminals (Front L/R, Center, Surround L/R, Surround Back L/R) and subwoofer to the SUBWOOFER PRE OUT. Use the YPAO calibration microphone to automatically adjust levels.
Can I stream music from my phone?
Yes, via Bluetooth, AirPlay 2, or Spotify Connect. Select the appropriate input on the receiver and pair your device.
How do I update the firmware?
Connect the receiver to the internet via Wi-Fi or Ethernet. Go to Setup > Firmware Update and select 'Update Now'. Do not power off during update.
What should I do if there is no sound?
Check that the correct input is selected, speakers are properly connected, and the receiver is not muted. Verify HDMI ARC setup and that the TV audio output is set to 'External Speakers'.
How do I calibrate the sound using YPAO?
Plug the YPAO microphone into the front panel, set it at ear level in the listening position. Go to Setup > YPAO and run the automatic calibration. Follow on-screen instructions.
Can I play audio from multiple input sources at once?
Yes, you can assign Zone 2 or Zone 3 for different sources. For example, play TV in main room and a CD in Zone 2 simultaneously.
What is the purpose of the 'Pure Direct' mode?
Pure Direct bypasses all tone controls and digital processing for the purest audio signal. It disables all surround modes and video processing.
How do I reset the receiver to factory settings?
Turn off the receiver, then press and hold the 'Straight' button while turning it on. The display shows 'Advanced Setup' then select 'Factory Reset'. Confirm.
Does the RX-V1083 support Dolby Atmos?
Yes, it supports Dolby Atmos and DTS:X with height channels or Dolby Atmos enabled speakers. Connect additional height speakers or use up-firing modules.
User questions about RX-V1083 YAMAHA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual RX-V1083 - YAMAHA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RX-V1083 by YAMAHA.