18P HEX IP - Effect machine Adj - Free user manual and instructions
Find the device manual for free 18P HEX IP Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Effect Machine (LED Par) |
| Brand | Adj |
| Model | 18P HEX IP |
| LED Type | 18 x 6W HEX (RGBWA+UV) LEDs |
| Beam Angle | 25° |
| DMX Channels | 6 / 9 / 18 selectable |
| Control Protocols | DMX512, Master/Slave, Auto, Sound Active |
| Strobe Rate | 0-20 Hz |
| Dimmer | 0-100% linear dimming |
| Input Voltage | 100-240V AC, 50/60Hz |
| Power Consumption | 150W |
| Dimensions (L x W x H) | 295 x 235 x 295 mm |
| Weight | 2.8 kg |
| IP Rating | IP65 |
| Housing Material | Aluminum die-cast |
| Cooling | Passive convection |
| Mounting Options | Floor, truss via Omega bracket |
| Power Connector | PowerCon (In/Out) |
| DMX Connector | 3-pin XLR (In/Out) |
| Included Accessories | Omega brackets, power cable, user manual |
| Cleaning | Use a soft dry cloth; avoid liquids and abrasive cleaners |
| Replaceable Parts | LED modules, power supply, fuse, DMX connectors |
| Safety Features | Overcurrent protection, thermal protection, safety cable loop |
Frequently Asked Questions - 18P HEX IP Adj
How do I set the DMX address on the 18P HEX IP?
Press the MENU button to enter the menu, navigate to ADDR, use UP/DOWN to select the desired address, and press ENTER.
What are the different operating modes?
The fixture supports DMX, Master/Slave, Auto (built-in programs), and Sound Active modes. Cycle through modes using the MENU button.
How do I connect multiple fixtures together?
Use DMX cables to daisy-chain fixtures. Set the first unit as Master and others as Slave. Ensure proper termination on the last fixture.
Can this fixture be used outdoors?
Yes, the IP65 rating allows outdoor use. However, ensure power connections are weatherproof and the unit is not submerged.
What is the recommended cleaning method?
Disconnect power and allow to cool. Use a soft, dry cloth to wipe the housing and lens. Do not use solvents or water.
How do I replace a blown fuse?
Locate the fuse holder near the power input, pull it out, replace with a fuse of the same rating (e.g., T10A 250V), and push back in.
What DMX cable is required?
Standard 3-pin XLR microphone cables work for short runs, but use DMX-specific cables with 120Ω impedance for longer distances.
The fixture does not respond to DMX. What should I check?
Verify DMX address matches the controller, check cable connections, ensure the controller is sending data, and try a different DMX cable.
How do I mount the fixture on a truss?
Attach the included Omega brackets to the fixture using the quick-lock clamps, then secure the brackets to the truss with a C-clamp and safety cable.
What is the expected LED lifespan?
The LEDs are rated for approximately 50,000 hours. Over time, brightness may gradually decrease, but they do not burn out suddenly.
User questions about 18P HEX IP Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual 18P HEX IP - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 18P HEX IP by Adj.