SP30 - Mixer Globe - Free user manual and instructions
Find the device manual for free SP30 Globe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Mixer |
| Brand | Globe |
| Model | SP30 |
| Number of Channels | 4 |
| Inputs | 4 x XLR/TRS combo jacks, 2 x RCA |
| Outputs | 2 x XLR main out, 1 x 1/4" headphone |
| EQ per Channel | 3-band (High, Mid, Low) |
| Built-in Effects | 16 digital presets (reverb, delay, chorus) |
| Phantom Power | +48V (switchable per channel) |
| Power Supply | 12V DC, 500mA (included adapter) |
| Dimensions (W x D x H) | 200 x 150 x 50 mm |
| Weight | 1.2 kg |
| Material | Metal chassis with plastic knobs |
| Color | Black |
| Safety Features | Overload protection, ground lift switch |
| Maintenance | Clean with dry soft cloth; avoid liquids |
| Spare Parts Availability | Contact Globe customer support |
| Warranty | 2 years |
| General Use | Live sound, small venues, home recording |
Frequently Asked Questions - SP30 Globe
How do I connect a microphone to the SP30?
Connect your XLR microphone to any of the combo jacks on channels 1-4. Make sure phantom power is enabled if using a condenser mic. Adjust the channel gain and fader to desired level.
How do I enable phantom power?
Press the +48V switch on the channel you are using. A red LED will indicate phantom power is active. Use caution with ribbon mics.
How do I adjust the EQ settings?
Each channel has three EQ knobs: High, Mid, and Low. Turn clockwise to boost, counterclockwise to cut. The center detent is flat.
How can I connect external effects?
The SP30 has a Send/Return loop. Connect the Send output to your effect input, and the effect output to the Return input. Use the FX send knob per channel.
What is the maximum input level?
The maximum input level before clipping is +10 dBu for XLR inputs. The gain knob can adjust sensitivity from -20 dB to +40 dB.
How do I set up for recording?
Connect the Main Out (XLR) to your audio interface or recorder. Use the Record Out RCA jacks for a direct stereo output. Set levels on the master fader.
How should I clean the mixer?
Turn off the mixer and unplug it. Wipe the surface with a dry, soft cloth. Do not use water or cleaning solvents. For knobs, use a slightly damp cloth and dry immediately.
My SP30 has no power. What should I check?
Ensure the power adapter is connected securely to the mixer and the wall outlet. Check if the adapter's LED is lit. If not, try a different outlet. If still no power, contact Globe support.
Is there a firmware update available?
The SP30 does not support firmware updates. All settings are hardware-based. For any issues, refer to the user manual or contact Globe.
Where can I find spare parts?
Spare parts such as knobs, faders, and power adapters can be ordered through Globe customer service. Visit the Globe website and use the support form.
User questions about SP30 Globe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual SP30 - Globe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SP30 by Globe.
USER MANUAL SP30 Globe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Globe
Model : SP30
Category : Mixer