8 Step Program Foot Controller - Hi-Fi System Electro Harmonix - Free user manual and instructions
Find the device manual for free 8 Step Program Foot Controller Electro Harmonix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Programmable 8-Step Foot Controller |
| Inputs | Expression pedal input, MIDI input, CV/Gate input |
| Outputs | MIDI output, CV/Gate output (up to 8 steps) |
| Power Supply | 9VDC center-negative power adapter (included) |
| Dimensions | 12.7 x 6.1 x 2.5 inches (32.3 x 15.5 x 6.4 cm) |
| Weight | 2.1 lbs (0.95 kg) |
| Display | 8 LED step indicators + expression pedal LED |
| Controls | 8 step buttons, rate knob, expression pedal, mode switch |
| Functions | Sequential or random step sequencing, adjustable step values, tap tempo, MIDI sync |
| Construction | Heavy-duty metal chassis with rubber foot pads |
| Compatibility | Compatible with synthesizers, modular systems, MIDI gear |
| Cleaning | Wipe with a dry cloth; avoid solvents and abrasive cleaners |
| Safety | Use only supplied power adapter; keep away from moisture and extreme temperatures |
| Spare Parts | Contact Electro Harmonix support for replacement adapter or footswitches |
| Reparability | User-serviceable fuses; see manual for internal adjustments |
Frequently Asked Questions - 8 Step Program Foot Controller Electro Harmonix
How do I power the 8 Step Program Foot Controller?
Use the included 9VDC center-negative power adapter. Plug it into the power jack on the back of the unit. Do not use other adapters as they may damage the device.
Can I connect the foot controller to my synthesizer?
Yes, use the MIDI or CV/Gate outputs. For MIDI, connect via standard 5-pin DIN. For CV/Gate, use 1/4" TS cables. Ensure your synthesizer accepts control voltage or MIDI.
How do I program the steps?
Press a step button to select it, then turn the rate knob or use an expression pedal to set the value. The LED will indicate the current value. Repeat for each step.
What is the expression pedal used for?
The expression pedal can control the master rate or be assigned to step values. It also acts as a foot-operated controller for real-time parameter changes.
Can I sync the 8 Step Program to MIDI clock?
Yes, send a MIDI clock signal to the MIDI input. The controller will sync its rate to the incoming clock. You can also set the number of steps per beat.
How do I clean the device?
Unplug the unit and wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the finish or electronics.
What should I do if a step button stops working?
First check if the unit is properly powered. If the issue persists, contact Electro Harmonix support. The footswitches are not user-serviceable without professional help.
Can I use the 8 Step Program with Eurorack modules?
Yes, using the CV/Gate outputs. The CV output can control pitch or other parameters, and the gate output triggers events. Set output range to 0-10V European standard.
Is there a way to save my step sequences?
The 8 Step Program does not have internal memory for saving sequences. However, you can send MIDI program change commands to recall presets from external devices.
What is the warranty period?
Electro Harmonix offers a one-year limited warranty from the date of purchase. Keep your receipt for service. Extended warranties may be available.
User questions about 8 Step Program Foot Controller Electro Harmonix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual 8 Step Program Foot Controller - Electro Harmonix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 8 Step Program Foot Controller by Electro Harmonix.