01585.AX - Smart Home Vimar - Free user manual and instructions
Find the device manual for free 01585.AX Vimar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Smart home actuator |
| Dimensions (W x H x D) | 45 x 45 x 20 mm |
| Weight | 50 g |
| Power supply | 24 V DC |
| Power consumption | 0.5 W (idle), 2 W (active) |
| Communication protocol | KNX, proprietary RF |
| Operating temperature | 0 °C to 40 °C |
| Degree of protection | IP20 |
| Mounting type | Wall box (flush-mount) |
| Primary functions | On/Off, dimming, shutter control, scene control |
| Max load | 2500 W (resistive), 1000 W (LED) |
| Materials | Thermoplastic, stainless steel |
| Color | White (AX series) |
| Maintenance and cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety features | Overload protection, short circuit protection |
| Spare parts and repairability | Not user-serviceable. Contact a qualified technician. |
| General information | Compatible with Vimar By-me and KNX systems. |
Frequently Asked Questions - 01585.AX Vimar
What is the Vimar 01585.AX device?
The Vimar 01585.AX is a smart home actuator designed for use with Vimar By-me and KNX systems. It can control lights, blinds, and other loads.
What are the dimensions of the 01585.AX?
The device measures 45 x 45 x 20 mm (width x height x depth) and fits into a standard flush-mount wall box.
What is the power supply requirement?
It requires 24 V DC power supply. Connect polarity correctly, typically from a KNX bus or dedicated power supply.
How do I pair the 01585.AX with my Vimar system?
Pairing is done via the Vimar By-me configuration software or through the KNX programming tool. Ensure the device is connected to the bus and follow the manual.
What is the maximum load capacity?
For resistive loads, max 2500 W; for LED loads, max 1000 W. Do not exceed these values.
Can I use the 01585.AX for dimming?
Yes, it supports dimming for compatible dimmable loads (e.g., LED, incandescent). See the manual for load compatibility.
What should I do if the device is not responding?
Check the 24 V DC power supply and bus connection. Reset the device by disconnecting power for 30 seconds. If the issue persists, consult a specialist.
Is the device compatible with other smart home systems?
It is designed for Vimar By-me and KNX systems. Integration with other systems may require a gateway.
How do I clean the 01585.AX?
Use a soft, dry cloth to clean the surface. Avoid water, solvents, or abrasive cleaners.
Can I replace parts myself?
No, the device is not user-serviceable. For any repairs, contact a qualified technician or Vimar support.
User questions about 01585.AX Vimar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smart Home in PDF format for free! Find your manual 01585.AX - Vimar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 01585.AX by Vimar.
USER MANUAL 01585.AX Vimar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vimar
Model : 01585.AX
Category : Smart Home