MB-55 - Effect machine Antari - Free user manual and instructions
Find the device manual for free MB-55 Antari in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fog Machine |
| Brand | Antari |
| Model | MB-55 |
| Power Consumption | 500 W |
| Voltage | 220-240 V / 50-60 Hz |
| Weight | 4.5 kg |
| Dimensions (L x W x H) | 350 x 200 x 200 mm |
| Fluid Tank Capacity | 0.8 L |
| Heat-up Time | 3 minutes |
| Fog Output | 1500 cubic feet per minute |
| Control Options | DMX-512, Remote Control |
| Heating Element | Stainless steel |
| Safety Features | Thermal fuse, overheat protection |
| Cleaning | Regular cleaning recommended with distilled water |
| Spare Parts Availability | Available from Antari authorized dealers |
| Repair Service | Contact Antari support or authorized service centers |
| Usage Environment | Indoor use only, well-ventilated area |
Frequently Asked Questions - MB-55 Antari
What type of fluid should I use in the Antari MB-55?
Use only high-quality water-based fog fluid recommended by Antari. Avoid using oil-based fluids as they may damage the machine.
How long does it take for the MB-55 to heat up?
The MB-55 has a heat-up time of approximately 3 minutes. The LED indicator will show when it is ready.
Can I control the MB-55 with DMX?
Yes, the MB-55 supports DMX-512 control. Refer to the manual for DMX addressing and configuration.
What should I do if the fog output is weak?
Check the fluid level, ensure the machine is properly heated, and clean the nozzle. Weak output may also indicate a clogged pump.
How do I clean the MB-55?
Run a mixture of distilled water and a cleaning solution through the machine periodically. Follow the cleaning instructions in the manual.
Is the MB-55 safe to use outdoors?
The MB-55 is designed for indoor use only. Using it outdoors may expose it to moisture and dirt, causing damage.
What does the overheat protection do?
The thermal fuse automatically shuts off the heater if the machine exceeds safe operating temperature, preventing fire hazards.
Where can I find spare parts for the MB-55?
Spare parts are available from Antari authorized dealers and service centers. Check the Antari website for a list of distributors.
How long can the MB-55 run continuously?
Continuous run time depends on fluid consumption. With a full tank (0.8 L), it can run for approximately 30-40 minutes of continuous output.
Why is my MB-55 leaking fluid?
Leaks may occur if the tank is overfilled, the cap is loose, or the pump seals are worn. Tighten the cap and check for damage. If persistent, contact support.
User questions about MB-55 Antari
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual MB-55 - Antari and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MB-55 by Antari.
USER MANUAL MB-55 Antari
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Antari
Model : MB-55
Category : Effect machine