INVPLUS1100 - Pump Madimack - Free user manual and instructions
Find the device manual for free INVPLUS1100 Madimack in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pool Pump |
| Model | INVPLUS1100 |
| Brand | Madimack |
| Power Input | 1100 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Max Flow Rate | 550 L/min |
| Max Head | 12 m |
| Inlet/Outlet Size | DN50 (2") |
| Protection Class | IPX5 |
| Insulation Class | F |
| Motor Type | Inverter (Variable Speed) |
| Speed Control | Multi-speed / Remote |
| Noise Level | < 65 dB(A) |
| Dimensions (L x W x H) | 320 x 220 x 280 mm |
| Weight | 12.5 kg |
| Material | Reinforced Thermoplastic / Stainless Steel |
| Strainer Basket | Transparent, 1.5L capacity |
| Min. Operating Temperature | 5 °C |
| Max. Operating Temperature | 40 °C |
| Warranty | 2 years |
| Included Accessories | User manual, connectors, O-rings |
Frequently Asked Questions - INVPLUS1100 Madimack
How do I install the INVPLUS1100 pump?
Ensure the pump is placed on a stable, level surface. Connect the inlet and outlet pipes using the provided connectors. Tighten all fittings securely. Electrical connection must be done by a qualified electrician following local codes.
What is the recommended maintenance schedule?
Check the strainer basket weekly and clean when necessary. Inspect the pump shaft seal every 3 months. Lubricate the motor bearings annually. Flush the pump with fresh water if used with chemicals.
Can the pump run dry?
No. Running the pump dry can damage the seal and motor. Always ensure the pump is primed with water before starting.
How do I adjust the speed?
The INVPLUS1100 features variable speed control. Use the control panel to select from preset speeds (Low, Medium, High) or use the remote control (if included) to adjust speed continuously.
What is the maximum operating temperature?
The maximum water temperature allowed is 40 °C (104 °F). Exceeding this may cause damage to the pump components.
How do I clean the filter basket?
Turn off the pump and close the valves. Unscrew the transparent lid of the strainer basket. Remove the basket and rinse with a hose. Reinstall and tighten the lid securely.
What should I do if the pump is noisy?
Check for air leaks in the suction line. Ensure the pump is mounted on a solid base. Clean the impeller if debris is present. If noise persists, contact customer support.
Is the pump suitable for saltwater pools?
Yes, the INVPLUS1100 is built with corrosion-resistant materials and is suitable for both chlorine and saltwater pools. Rinse with fresh water after prolonged salt exposure.
How do I winterize the pump?
Drain all water from the pump by removing the drain plugs. Disconnect and store the pump in a dry, frost-free location. Cover the pump to protect from dust.
Where can I purchase spare parts?
Spare parts such as seals, impellers, and lids are available through authorized Madimack dealers or online. Use only genuine parts to maintain warranty.
User questions about INVPLUS1100 Madimack
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual INVPLUS1100 - Madimack and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. INVPLUS1100 by Madimack.
USER MANUAL INVPLUS1100 Madimack
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Madimack
Model : INVPLUS1100
Category : Pump