FN9108HE - Uncategorized FOSCAM - Free user manual and instructions
Find the device manual for free FN9108HE FOSCAM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Model | FN9108HE |
| Brand | Foscam |
| Channels | 8 |
| Maximum Resolution | 8MP (4K) / 1080p depending on camera |
| Video Compression | H.265+ / H.265 / H.264 |
| PoE Ports | 8 (IEEE 802.3af/at) |
| HDD Support | 1 SATA III up to 10TB (not included) |
| Dimensions (W x D x H) | 315 x 270 x 50 mm |
| Weight | 2.5 kg (without HDD) |
| Power Supply | DC 12V / 3A (adapter included) |
| Power Consumption | < 30W (without HDD) |
| Operating Temperature | -10°C to 55°C |
| Network Interface | 1 RJ45 10/100/1000 Mbps |
| USB Ports | 2 x USB 2.0 |
| HDMI Output | 1 x HDMI 1.4 (up to 1920x1080) |
| VGA Output | 1 x VGA (up to 1920x1080) |
| Audio | 1 audio input, 1 audio output (RCA) |
| Remote Access | Via Foscam app (iOS/Android) or web browser |
| Motion Detection | Yes, with customizable zones and alerts |
| Recording Modes | Continuous, motion-triggered, scheduled |
| Playback | Local via HDMI/VGA, remote via app/PC |
| Maintenance | Keep in ventilated area; clean with dry cloth; avoid liquids |
| Safety | Use only provided power adapter; do not expose to rain or moisture |
| Spare Parts | Power adapter, Ethernet cables, mouse (if included), mounting screws, remote control (optional) |
Frequently Asked Questions - FN9108HE FOSCAM
How do I set up the Foscam FN9108HE NVR for the first time?
Connect the NVR to your router via Ethernet, attach a monitor to the HDMI or VGA port, plug in the power adapter, and follow the on-screen setup wizard. You can then add cameras by plugging them into the PoE ports or via network discovery.
Can I access the FN9108HE remotely from my smartphone?
Yes, download the Foscam app (iOS/Android), create an account, and scan the QR code from the NVR's network settings. Ensure remote access is enabled in the NVR menu.
What hard drive is compatible with the FN9108HE?
The NVR supports one SATA III 3.5-inch hard drive up to 10TB. Recommended models include Seagate SkyHawk or WD Purple surveillance drives.
How can I update the firmware on my FN9108HE?
Download the latest firmware from the Foscam support website, save it to a USB drive, insert the USB into the NVR, go to System > Upgrade, and select the file. Do not power off during upgrade.
Why am I not receiving motion detection alerts?
Check that motion detection is enabled for the camera, sensitivity is set appropriately, and notification settings are configured in the app. Also ensure the NVR is connected to the internet and email/SMS settings are correct.
Can I use non-PoE cameras with the FN9108HE?
Yes, you can connect non-PoE cameras via a separate PoE switch or injector. The NVR has 8 PoE ports for compatible cameras, but it also supports adding cameras over the network from other sources.
What is the maximum recording resolution and frame rate?
The NVR supports up to 8MP cameras. Recording resolution depends on the camera; typical settings: 8MP at 15fps, 5MP at 20fps, 1080p at 30fps. Actual frame rate may vary based on bandwidth and HDD capacity.
How do I perform a factory reset on the FN9108HE?
Locate the reset button on the back panel (often a pinhole). Press and hold it for 10 seconds while the NVR is powered on, or use System > Maintenance > Factory Default in the menu.
Can I view the NVR on a PC without a monitor?
Yes, install the Foscam VMS software on your PC, or access the NVR's web interface using its IP address in a browser. Make sure the PC is on the same network.
What should I do if the NVR is overheating?
Ensure the NVR is placed in a well-ventilated area, away from direct sunlight and other heat sources. Clean dust from vents. If overheating persists, reduce the recording bitrate or number of cameras.
User questions about FN9108HE FOSCAM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FN9108HE - FOSCAM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FN9108HE by FOSCAM.
USER MANUAL FN9108HE FOSCAM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FOSCAM
Model : FN9108HE
Category : Uncategorized