Intimidator Spot 110 - Effect machine Chauvet - Free user manual and instructions
Find the device manual for free Intimidator Spot 110 Chauvet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Spot Effect Light |
| Brand | Chauvet |
| Model | Intimidator Spot 110 |
| Light Source | 110W LED (white) |
| Beam Angle | 13° |
| Pan Range | 540° |
| Tilt Range | 270° |
| DMX Channels | 12 or 14 |
| Control Protocol | DMX512 |
| Operating Modes | DMX, Auto, Sound-Active, Master/Slave |
| Power Consumption | 150W max |
| Input Voltage | 100-240V AC, 50/60Hz |
| Dimensions (L x W x H) | 9.8 x 7.5 x 14.6 in (250 x 190 x 370 mm) |
| Weight | 12.1 lb (5.5 kg) |
| Housing Material | Metal and flame-retardant plastic |
| Cooling System | Fan-cooled |
| IP Rating | IP20 (indoor use only) |
| Safety Features | Safety cable attachment point, thermal protection |
| Maintenance | Clean optics with a soft cloth; check fan and vents regularly |
| Repairability | Replaceable LED module, PCB, and fans; service by qualified technician |
| Included Accessories | Power cord, DMX cable, mounting bracket, and manual |
Frequently Asked Questions - Intimidator Spot 110 Chauvet
How do I reset the Intimidator Spot 110?
To reset the fixture, power it off and on again. It will automatically perform a self-test and reset pan, tilt, and colors.
What is the best way to clean the lens?
Use a soft, lint-free cloth lightly dampened with glass cleaner. Avoid abrasive materials that could scratch the optics.
Can I use this fixture outdoors?
No, the Intimidator Spot 110 is rated IP20 and is designed for indoor use only. Exposure to moisture or dust can damage the unit.
How many DMX channels does it use?
It can operate in 12-channel or 14-channel mode. Refer to the manual for channel assignments.
Why is the light not responding to DMX?
Check that the DMX cable is properly connected and not damaged. Ensure the fixture is set to DMX mode and the correct DMX address matches the controller.
How do I replace the LED module?
The LED module should be replaced by a qualified technician. Contact Chauvet support or an authorized service center.
What power cable does it use?
A standard IEC power cord. The fixture accepts 100-240V AC, 50/60Hz.
Can I use sound activation without a controller?
Yes, set the fixture to Sound-Active mode. It will respond to music via the built-in microphone.
How do I mount the fixture?
Use the included mounting bracket and secure it with a clamp (not included). Always attach a safety cable to the designated point.
What is the lamp life?
The LED source has an average life of 50,000 hours. When it dims or fails, the entire LED module should be replaced.
User questions about Intimidator Spot 110 Chauvet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Intimidator Spot 110 - Chauvet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Intimidator Spot 110 by Chauvet.