75663590 - Temperature Controller HAGER - Free user manual and instructions
Find the device manual for free 75663590 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Temperature Controller |
| Brand | Hager |
| Model | 75663590 |
| Dimensions (W x H x D) | 80 mm x 80 mm x 30 mm |
| Weight | 0.15 kg |
| Power Supply | 24 V AC/DC |
| Power Consumption | < 2 W |
| Display Type | Digital LCD |
| Temperature Range | 0 °C to 40 °C |
| Accuracy | ±0.5 °C |
| Control Type | On/Off or PID |
| Output Relay Rating | 16 A @ 230 V AC |
| Protection Rating | IP20 |
| Mounting Type | Wall or DIN rail |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -20 °C to 60 °C |
| Humidity Range | 5% to 85% RH (non-condensing) |
| Main Functions | Temperature measurement, setpoint control, hysteresis, alarm, timer |
| Maintenance and Cleaning | Clean with a soft, dry cloth. Do not use solvents. |
| Safety Instructions | Installation by qualified electrician required. Disconnect power before servicing. |
| Spare Parts and Repairability | Contact Hager support for spare parts. Repairs only by authorized personnel. |
| General Information | Refer to user manual for detailed instructions. Free PDF download available. |
Frequently Asked Questions - 75663590 HAGER
How do I install the Hager 75663590 Temperature Controller?
Installation should be performed by a qualified electrician. Mount the device on a wall or DIN rail, connect power supply (24V AC/DC) and load according to wiring diagram in the manual.
How to set the temperature setpoint?
Press the SET button to enter setpoint mode. Use the up/down arrows to adjust the desired temperature. Press SET again to confirm.
What does the error 'E1' mean?
Error E1 indicates a sensor fault. Check the temperature sensor connection and replace if damaged.
Can I use this controller for heating and cooling?
Yes, the controller supports both heating and cooling modes. Select the mode via the menu or parameter settings.
How to reset the controller to factory defaults?
Press and hold the SET and DOWN buttons simultaneously for 5 seconds. The display will show 'rES' to confirm reset.
What is the power supply requirement?
The controller operates on 24V AC/DC power supply. Ensure the transformer is rated for the device's consumption (< 2W).
How do I clean the device?
Use a soft, dry cloth to clean the exterior. Do not use water, solvents, or abrasive cleaners.
Where can I download the user manual?
The manual is available for free PDF download on notice-facile.com or the Hager website.
What is the temperature measurement range?
The controller measures temperature from 0 °C to 40 °C with an accuracy of ±0.5 °C.
How do I change the temperature unit from Celsius to Fahrenheit?
Access the parameter menu by holding SET for 3 seconds. Navigate to parameter 'Un' and toggle between C and F.
User questions about 75663590 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Temperature Controller in PDF format for free! Find your manual 75663590 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 75663590 by HAGER.
USER MANUAL 75663590 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : 75663590
Category : Temperature Controller