SQ-A - Camera Zenza Bronica - Free user manual and instructions
Find the device manual for free SQ-A Zenza Bronica in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Medium Format SLR Camera |
| Format | 6 x 6 cm on 120/220 roll film |
| Lens Mount | Bronica SQ mount (interchangeable lenses) |
| Shutter Type | Seiko #0 leaf shutter in lenses (mechanical) |
| Shutter Speeds | 1/500 to 8 sec + B |
| Flash Sync | X sync at all speeds (PC terminal) |
| Viewfinder | Waist-level finder with interchangeable focusing screens |
| Focusing | Manual via helicoid or bellows |
| Exposure Meter | Optional meter finder (not built-in) |
| Film Advance | Crank advance, double exposure prevention |
| Frame Counter | Automatic resetting |
| Dimensions (body only) | Approx. 166 x 100 x 90 mm |
| Weight (body only) | Approx. 900 g |
| Power Source | None (mechanical operation); optional meter finder uses battery |
| Battery Type (for meter) | One 1.5V silver oxide (SR44 or equivalent) |
| Film Back | Interchangeable film backs for 120/220 |
| Multiple Exposure | Possible via lever |
| Self-Timer | Built-in in some lens versions |
| Spare Parts Availability | Limited; common repairs possible with NOS or used parts |
| Repairability | Moderate; specialist camera technicians required for mechanical issues |
Frequently Asked Questions - SQ-A Zenza Bronica
How do I load film into the Zenza Bronica SQ-A?
Open the film back, insert the spool into the take-up side, pull the film leader across to the empty spool, and advance until the arrows align with the start marks. Close the back and advance to frame 1.
What lenses are compatible with the SQ-A?
The SQ-A uses the Bronica SQ mount. Compatible lenses include Zenzanon-S, -PS, and -S series, ranging from 40mm to 500mm. Some older lenses may need adaptation.
Does the SQ-A require batteries?
The camera itself is fully mechanical and does not require batteries. However, optional accessories like the AE finder or meter finder need a 1.5V silver oxide battery (SR44).
How do I set the shutter speed?
Shutter speed is set on the lens barrel. Rotate the ring to the desired speed (1/500 to 8 sec or B). The speed is mechanically controlled.
Can I use 220 film in the SQ-A?
Yes, the SQ-A accepts 120 or 220 film. Use the appropriate film back (e.g., SQ-i120 for 120, SQ-i220 for 220). The frame counter will automatically adjust.
How do I replace the focusing screen?
Remove the waist-level finder, then release the screen retaining frame using the small lever. Insert the new screen with the matte side facing down and reinstall the finder.
What is the flash sync speed?
The SQ-A syncs with flash at all shutter speeds (X sync) via the PC terminal. No hot shoe is built-in; use a flash bracket with sync cable.
Why is the shutter not firing?
Check that the lens is fully mounted and locked. Ensure the film advance lever is fully wound and the camera is not in multiple exposure mode. If the mirror is locked up, release it.
How do I clean the lens?
Use a soft brush to remove dust, then a lens cleaning solution on a microfiber cloth. Gently wipe in a circular motion. Avoid touching the glass with fingers.
Where can I get spare parts or repairs?
Spare parts are available from specialized camera repair shops or online sources like eBay. Repairs should be done by a technician familiar with mechanical medium format cameras.
User questions about SQ-A Zenza Bronica
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual SQ-A - Zenza Bronica and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SQ-A by Zenza Bronica.