ETA Heiztechnik

PC 25 - Boiler ETA Heiztechnik - Free user manual and instructions

Find the device manual for free PC 25 ETA Heiztechnik in PDF.

📄 76 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ETA Heiztechnik PC 25 - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
TypeGas condensing boiler
ModelPC 25
BrandETA Heiztechnik
Nominal heat output25 kW
Dimensions (H x W x D)700 x 400 x 300 mm
Weight35 kg
Energy sourceNatural gas / LPG
EfficiencyUp to 98% (condensing)
FunctionsCentral heating and domestic hot water
Control panelDigital display with rotary dial
Operating pressure1.5 bar (recommended)
Maximum flow temperature85°C
Flue typeConcentric (60/100 mm)
Maintenance intervalAnnual service by qualified engineer
CleaningCheck condensate trap and clean as needed
Safety featuresOverheat protection, frost protection, safety valve
Spare partsThermocouple, pump, fan, heat exchanger
ReparabilityModular design, parts available from stock
Warranty2 years (manufacturer)

Frequently Asked Questions - PC 25 ETA Heiztechnik

What is the recommended operating pressure for the ETA PC 25 boiler?
The recommended operating pressure is 1.5 bar when cold. Check the pressure gauge and top up if below 1 bar.
How do I reset the boiler after a fault?
Press the reset button on the control panel for 2 seconds. If the fault persists, consult the error code and manual.
What does error code F28 mean on the ETA PC 25?
Error F28 indicates a flame loss during ignition. Check gas supply, spark electrode, and ionisation probe.
How often should I service the ETA PC 25 boiler?
An annual service by a Gas Safe registered engineer is required to maintain warranty and efficiency.
Can I use the boiler if the condensate pipe is frozen?
No, a frozen condensate pipe will cause the boiler to lock out. Thaw the pipe with warm water or a heat pack.
What is the maximum heating temperature setting?
The maximum flow temperature is 85°C. Adjust via the control dial for radiator or underfloor heating.
Why does the boiler go off during windy weather?
Strong winds can affect the flue terminal. Check the flue position and ensure it complies with installation standards.
How do I drain the boiler for maintenance?
Turn off the power and gas, close the isolation valves, then open the drain valve at the bottom of the boiler.
What type of flue is used for the PC 25?
The boiler uses a concentric flue (60/100 mm) for balanced flue operation. Extensions are available for longer runs.
Where can I find spare parts for the ETA PC 25?
Genuine spare parts are available from ETA Heiztechnik dealers or authorised distributors. Use model number PC 25.

User questions about PC 25 ETA Heiztechnik

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Boiler in PDF format for free! Find your manual PC 25 - ETA Heiztechnik and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PC 25 by ETA Heiztechnik.

USER MANUAL PC 25 ETA Heiztechnik

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ETA Heiztechnik

Model : PC 25

Category : Boiler