Electronics International

FP-5L/FT-60 - Uncategorized Electronics International - Free user manual and instructions

Find the device manual for free FP-5L/FT-60 Electronics International in PDF.

📄 22 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Electronics International FP-5L/FT-60 - page 4
4 / 22
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Fuel Flow Indicator
Brand Electronics International
Model FP-5L/FT-60
Dimensions 2.25 x 1.5 x 1 inches
Weight 4 oz (113 g)
Power Supply 12-32 VDC
Current Consumption 150 mA max
Display Backlit LCD, 4 digits
Measurement Range 0.1 to 99.9 GPH (Gallons Per Hour)
Accuracy ±2% of reading
Input Signal Flow transducer (pulse or frequency)
Operating Temperature -20°C to +70°C
Storage Temperature -40°C to +85°C
Main Functions Fuel flow rate, total fuel used, resettable trip, low flow alarm
Installation Panel mount with cutout (2.125 x 1.375 inches)
Maintenance Clean with soft dry cloth; no user-serviceable parts
Safety Follow installation manual to avoid electrical hazards
Spare Parts Contact Electronics International for replacement
Repairability Return to manufacturer for repair
Certifications FCC Part 15, CE

Frequently Asked Questions - FP-5L/FT-60 Electronics International

What is the FP-5L/FT-60 used for?
The FP-5L/FT-60 is a fuel flow indicator designed for aircraft to monitor fuel flow rate and total fuel consumption.
How do I install the FP-5L/FT-60?
Mount the unit in a 2.125 x 1.375 inch panel cutout, connect power (12-32 VDC) and the flow transducer signal wire. Refer to the manual for detailed wiring.
Can I use the FP-5L/FT-60 with any flow transducer?
It accepts pulse or frequency input from most turbine or positive displacement flow transducers. Calibration may be required for specific sensors.
How do I calibrate the FP-5L/FT-60?
Enter calibration mode via the front panel buttons to set the K-factor (pulses per gallon) for your transducer. The manual provides step-by-step instructions.
What does the low flow alarm do?
The low flow alarm triggers a visual indicator when fuel flow drops below a user-set threshold, alerting to potential fuel starvation.
How accurate is the FP-5L/FT-60?
Accuracy is ±2% of reading over the operating range, depending on transducer calibration.
Can I reset the total fuel used?
Yes, press and hold the reset button to zero the trip odometer. The cumulative total is stored in non-volatile memory.
What is the power requirement?
The unit operates on 12-32 VDC and draws less than 150 mA. It is protected against reverse polarity.
How do I clean the display?
Use a soft, dry cloth to wipe the lens. Avoid solvents or abrasive cleaners.
Where can I get replacement parts or service?
Contact Electronics International directly or visit their website for spare parts and repair services.

User questions about FP-5L/FT-60 Electronics International

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual FP-5L/FT-60 - Electronics International and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FP-5L/FT-60 by Electronics International.

USER MANUAL FP-5L/FT-60 Electronics International

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Electronics International

Model : FP-5L/FT-60

Category : Uncategorized