RX-975 - Receiver ROTEL - Free user manual and instructions
Find the device manual for free RX-975 ROTEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Rotel |
| Model | RX-975 |
| Power Output (RMS) | 100 Watts per channel into 8 ohms |
| Total Harmonic Distortion | < 0.03% |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Signal-to-Noise Ratio | 100 dB (IHF-A) |
| Input Sensitivity (MM Phono) | 2.5 mV |
| Input Sensitivity (Line) | 150 mV |
| Speaker Impedance | 4 to 16 ohms |
| Dimensions (W x H x D) | 17.2 x 5.5 x 14.5 inches (437 x 140 x 368 mm) |
| Weight | 24.3 lbs (11 kg) |
| Power Consumption | 500 VA max |
| Inputs | Phono (MM), Tuner, CD, Tape 1, Tape 2, Aux |
| Outputs | Speakers A, B, Preamp out, Rec out |
| Tuner Bands | AM/FM |
| Number of Presets | 16 presets |
| Remote Control | Not included (optional) |
| Headphone Jack | 6.3 mm (1/4 inch) stereo |
| Cleaning Instructions | Use a soft, dry cloth. Avoid solvents. |
| Safety Features | Protection circuit for short circuits and overheating |
| Repairability | Serviceable by qualified technician; spare parts available from Rotel distributors |
Frequently Asked Questions - RX-975 ROTEL
What is the power output of the Rotel RX-975?
The Rotel RX-975 delivers 100 watts per channel into 8 ohms, with low distortion.
Does the RX-975 have a phono input?
Yes, it has a dedicated phono input for moving magnet (MM) cartridges.
Can I connect two pairs of speakers to the RX-975?
Yes, it supports two pairs of speakers (A and B) with independent switching.
What is the frequency response of the RX-975?
The frequency response is 20 Hz to 20 kHz within ±0.5 dB.
Does the RX-975 include a remote control?
No, the RX-975 does not include a remote control; it is operated via front panel controls.
How do I clean the RX-975?
Use a soft, dry cloth to wipe the exterior. Avoid using liquids or abrasive cleaners.
What is the weight of the RX-975?
The receiver weighs approximately 24.3 lbs (11 kg).
Can I use the RX-975 with 4-ohm speakers?
Yes, it is rated for speaker impedances from 4 to 16 ohms.
What should I do if the receiver overheats?
Ensure adequate ventilation around the unit. The protection circuit will shut down power if overheating occurs.
Where can I find replacement parts for the RX-975?
Parts are available through authorized Rotel distributors or service centers.
User questions about RX-975 ROTEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual RX-975 - ROTEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RX-975 by ROTEL.
USER MANUAL RX-975 ROTEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ROTEL
Model : RX-975
Category : Receiver