KN-COP-DP-10YL - Gas detector KIDDE - Free user manual and instructions
Find the device manual for free KN-COP-DP-10YL KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Carbon Monoxide Alarm |
| Model | KN-COP-DP-10YL |
| Brand | Kidde |
| Dimensions (H x W x D) | 5.5 x 3.5 x 1.5 inches |
| Weight | 0.5 lbs |
| Power Source | 120V AC hardwired with 10-year sealed lithium battery backup |
| Sensor Type | Electrochemical |
| Detection Range | 30-1000 ppm CO |
| Alarm Sound Level | 85 dB at 10 feet |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | 5% to 95% non-condensing |
| End-of-Life Warning | After 10 years of operation |
| Test/Silence Button | Yes |
| Peak Level Memory | Displays highest CO level recorded |
| Certifications | UL Listed, CSA |
| Installation | Ceiling or wall mount (h/w included) |
| Maintenance | Weekly test; clean with vacuum or soft brush |
| Battery Replacement | Not required (sealed for life) |
| Warranty | 10-year limited |
Frequently Asked Questions - KN-COP-DP-10YL KIDDE
What type of gas does the KN-COP-DP-10YL detect?
It detects carbon monoxide (CO), not natural gas or propane.
How is the alarm powered?
It is 120V AC hardwired with a 10-year sealed lithium battery backup.
Does this CO alarm have a digital display?
Yes, it features a digital display that shows the current CO level and peak level memory.
How long does the battery last?
The sealed battery lasts the entire 10-year life of the alarm; no replacement needed.
Where should I install the alarm?
Install on a ceiling or high on a wall in or near sleeping areas, away from vents, windows, and fuel-burning appliances.
How do I test the alarm?
Press and hold the Test/Silence button until the alarm sounds; it will emit 4 loud beeps.
What does a chirping sound mean?
A chirp every 30-60 seconds indicates low battery or end-of-life. For this model, chirps after 10 years mean replace the entire unit.
Can I paint or cover the alarm?
No, painting or covering the alarm can block air vents and prevent proper detection.
What should I do if the alarm goes off?
Immediately evacuate the premises and call emergency services. Do not re-enter until the alarm stops and the source is cleared.
How do I clean the alarm?
Use a vacuum cleaner with a soft brush attachment to gently clean the vents. Do not use water or chemicals.
User questions about KN-COP-DP-10YL KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Gas detector in PDF format for free! Find your manual KN-COP-DP-10YL - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KN-COP-DP-10YL by KIDDE.
USER MANUAL KN-COP-DP-10YL KIDDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KIDDE
Model : KN-COP-DP-10YL
Category : Gas detector