Ultrastar Data60 - Disk array WESTERN DIGITAL - Free user manual and instructions
Find the device manual for free Ultrastar Data60 WESTERN DIGITAL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Disk Array / Storage Enclosure |
| Brand | Western Digital |
| Model | Ultrastar Data60 |
| Form Factor | 4U Rackmount |
| Drive Bays | 60 x 3.5-inch (or 2.5-inch with adapters) |
| Supported Drive Types | SAS, SATA HDD/SSD |
| Maximum Storage Capacity | Up to 1.2 PB (with 20TB drives) |
| Dimensions (H x W x D) | 176.7 x 482.6 x 812.8 mm (6.96 x 19 x 32 in) |
| Weight (Fully Loaded) | Approximately 30 kg (66.1 lbs) |
| Power Supply | Dual redundant 1600W AC PSUs |
| Input Voltage | 100-240 VAC, 50/60 Hz |
| Cooling | 4 hot-swappable fan modules |
| Connectivity | 4 x Mini-SAS HD SFF-8644 (12Gb/s) |
| Expansion | Supports daisy-chaining via SAS |
| Management | Web-based GUI, CLI, SNMP |
| LED Indicators | Power, status, fault, drive activity |
| Operating Temperature | 5°C to 35°C (41°F to 95°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Relative Humidity | 5% to 95% non-condensing |
| Key Features | Hot-swap drives, redundant PSU, active-active controllers |
| Maintenance | Front/rear access for drive and module replacement |
| Safety | CE, FCC, UL, RoHS compliant |
| Spare Parts | PSU modules, fan trays, controller modules available |
| Warranty | 3 years limited (extendable) |
Frequently Asked Questions - Ultrastar Data60 WESTERN DIGITAL
What is the maximum capacity of the Ultrastar Data60?
The Ultrastar Data60 can hold up to 60 drives. With 20TB drives, the maximum raw capacity is 1.2 PB. Actual usable capacity depends on RAID configuration and drive sizes.
Can I mix SAS and SATA drives in the same enclosure?
Yes, the Ultrastar Data60 supports both SAS and SATA drives. However, mixing drive types in the same RAID group is generally not recommended for performance and reliability reasons.
What RAID levels are supported?
The enclosure itself is a JBOD (Just a Bunch Of Disks). RAID capabilities depend on the host controller or software. Many users pair it with a RAID controller or software RAID (e.g., ZFS, mdadm).
Is the Ultrastar Data60 hot-swappable?
Yes, all drive bays, power supplies, and fan modules are hot-swappable. Drives can be replaced without powering down the system, provided the host controller supports hot-plug.
What type of connection does it use?
The Ultrastar Data60 uses Mini-SAS HD (SFF-8644) connectors, supporting up to 12Gb/s per port. It typically has 4 ports, allowing a total bandwidth of 48Gb/s.
How do I manage the enclosure?
Management is done via a web-based GUI, command-line interface (CLI), or SNMP. The enclosure has a dedicated management port for out-of-band access.
How many power supplies does it have?
The Ultrastar Data60 includes dual redundant 1600W power supplies. They are hot-swappable and can be replaced without interrupting operation.
What are the dimensions and weight?
The enclosure measures 176.7 x 482.6 x 812.8 mm (6.96 x 19 x 32 in) and weighs approximately 30 kg (66.1 lbs) fully loaded with drives.
Does it support 2.5-inch drives?
Yes, with optional drive carriers/adapters, 2.5-inch drives can be installed in the 3.5-inch bays. However, the enclosure is optimized for 3.5-inch drives.
Where can I find the user manual?
The user manual can be downloaded from the Western Digital support website. It provides detailed instructions on installation, configuration, and troubleshooting.
User questions about Ultrastar Data60 WESTERN DIGITAL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Disk array in PDF format for free! Find your manual Ultrastar Data60 - WESTERN DIGITAL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ultrastar Data60 by WESTERN DIGITAL.