BT710 - Thermostat Elektrobock - Free user manual and instructions
Find the device manual for free BT710 Elektrobock in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermostat |
| Brand | Elektrobock |
| Model | BT710 |
| Display Type | LCD digital display |
| Power Supply | 2 AA batteries (1.5V each) or 24V AC/DC |
| Battery Life | Approximately 1 year under normal use |
| Dimensions (H x W x D) | 85 mm x 85 mm x 29 mm |
| Weight | 150 g (including batteries) |
| Temperature Range | 5°C to 35°C |
| Accuracy | ±0.5°C at 25°C |
| Programming | 7-day programmable with up to 4 time periods per day |
| Control Type | On/Off or modulating (PID) selectable |
| Compatible Systems | Gas, oil, electric, heat pump, and district heating |
| Mounting | Wall-mounted with included screws and anchors |
| Wireless Connectivity | None (wired connection to heating system) |
| Display Language | English, German, French, Italian, Spanish (selectable) |
| Cleaning Instructions | Wipe with a soft dry cloth; do not use liquids or abrasive cleaners |
| Safety Features | Frost protection, child lock, and overheat protection |
| Spare Parts & Repairability | Battery compartment door available; repair by qualified technician only |
| Warranty | 2 years from date of purchase |
Frequently Asked Questions - BT710 Elektrobock
How do I set the date and time on my BT710 thermostat?
Press the Menu button, use arrow keys to select Date/Time, then set day, month, year, and time using the arrow keys. Confirm with OK.
How can I program a heating schedule?
Press Menu, select Program, choose the day, then set up to 4 time periods with desired temperatures. Use arrows to adjust and OK to confirm.
What type of batteries does the BT710 use?
It uses two AA 1.5V alkaline batteries. Rechargeable batteries are not recommended as they may cause unstable operation.
How do I replace the batteries?
Slide the battery cover down at the bottom of the thermostat, remove old batteries, insert new ones with correct polarity (+/-), and replace the cover. The settings are retained.
My thermostat displays 'Err' or an error code. What should I do?
Common error codes: Err01 (sensor fault) - check wiring; Err02 (communication) - replace batteries; Err03 (overheat) - check system. Reset by removing batteries for 10 seconds. If persists, contact support.
Can I use the BT710 with a heat pump?
Yes, the BT710 is compatible with heat pumps. In the settings, select Heat Pump as the system type and set the appropriate compressor protection delay.
How do I enable the child lock?
Press and hold the Up and Down arrows simultaneously for 5 seconds. A padlock icon appears. Repeat to disable.
What does the frost protection function do?
If the room temperature drops below 5°C, the thermostat automatically activates heating to prevent freezing. You can adjust the setpoint via menu.
Why is the thermostat not responding to temperature changes?
Possible causes: dead batteries (replace), incorrect mode (check if in manual or off), or sensor issue. Try resetting by removing batteries for 10 seconds.
How do I reset the thermostat to factory settings?
Go to Menu > System > Factory Reset, confirm with OK. Alternatively, remove batteries, press and hold the Menu button while reinserting batteries, hold until display resets.
User questions about BT710 Elektrobock
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermostat in PDF format for free! Find your manual BT710 - Elektrobock and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BT710 by Elektrobock.
USER MANUAL BT710 Elektrobock
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elektrobock
Model : BT710
Category : Thermostat