Xerxes 20 Plus - Turntable Roksan - Free user manual and instructions
Find the device manual for free Xerxes 20 Plus Roksan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Turntable |
| Brand | Roksan |
| Model | Xerxes 20 Plus |
| Dimensions (W x D x H) | Approx. 470 x 380 x 160 mm |
| Weight | Approx. 15 kg |
| Power Supply | AC 230V / 50Hz or 115V / 60Hz |
| Platter Material | Acrylic with glass platter option |
| Bearing | Inverted ceramic ball bearing |
| Motor Type | AC synchronous motor with electronic speed control |
| Speed Options | 33 1/3 and 45 RPM |
| Tonearm Included | Yes (Roksan Nima or similar) |
| Suspension | Multi-layer spring suspension |
| Output | RCA phono cables (switchable moving magnet/moving coil) |
| Clean | Wipe with a soft, dry cloth; avoid liquids |
| Safety | Disconnect before cleaning; ensure stable placement |
| Spare Parts | Available through authorized service centers |
| Repairability | Serviceable by qualified technician |
Frequently Asked Questions - Xerxes 20 Plus Roksan
How do I replace the cartridge on my Roksan Xerxes 20 Plus turntable?
To replace the cartridge, first remove the tonearm headshell. Unscrew the two mounting screws holding the old cartridge. Connect the new cartridge wires (red right+, green right-, white left+, blue left-). Secure with screws, then check and adjust tracking force and anti-skate as per specifications.
What tracking force should I use for my cartridge?
Tracking force depends on the cartridge model. Refer to your cartridge manual. Typically, it ranges from 1.5 to 2.5 grams. Use a stylus force gauge for accurate adjustment.
How do I set up the anti-skate on the Xerxes 20 Plus?
Anti-skate is usually set to the same value as tracking force in grams. Rotate the anti-skate dial to match the tracking force. Verify by playing a test record and listening for channel balance.
What is the recommended speed for playing LPs?
Most LPs play at 33 1/3 RPM. Seven-inch singles often require 45 RPM. Use the speed selector on the turntable.
How do I adjust the turntable's suspension?
The Xerxes 20 Plus has adjustable spring suspension. If it is not level, carefully adjust the bolts under the plinth while the turntable is on a level surface.
Can I use a moving coil cartridge with my Xerxes 20 Plus?
Yes, the turntable's phono stage is switchable between moving magnet (MM) and moving coil (MC). Select the appropriate setting via the switch on the rear panel.
Why does my turntable hum?
Hum can be caused by poor grounding. Ensure the grounding wire from the tonearm is connected to the ground terminal on the preamplifier. Also check that all connections are secure.
How often should I clean the stylus?
Clean the stylus before every playback session using a stylus brush or gel cleaner. This reduces dust and improves sound quality.
What maintenance does the motor require?
The AC synchronous motor is maintenance-free. However, ensure the pulley and belt are clean and the belt is not stretched. Replace the belt every few years if needed.
How do I level the turntable?
Place a bubble level on the platter. Adjust the three feet (if equipped) or the suspension bolts until the bubble is centered.
User questions about Xerxes 20 Plus Roksan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual Xerxes 20 Plus - Roksan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Xerxes 20 Plus by Roksan.