852-103/040-000 - Switch Wago - Free user manual and instructions
Find the device manual for free 852-103/040-000 Wago in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Industrial Ethernet Switch |
| Model | 852-103/040-000 |
| Brand | Wago |
| Ports | 4x 10/100/1000 Mbps RJ45 |
| Dimensions (W x H x D) | 100 x 50 x 30 mm |
| Weight | 0.2 kg |
| Power Supply | 24 V DC (18–32 V), via terminal block |
| Power Consumption | 5 W typical |
| Operating Temperature | -40°C to +70°C |
| Protection Class | IP20 |
| Mounting | DIN rail mountable |
| Switching Capacity | 8 Gbps non-blocking |
| MAC Address Table | 2K entries |
| Management Features | VLAN, QoS, IGMP snooping, port mirroring |
| LED Indicators | Power, Link/Activity per port |
| Certifications | CE, UL 61010 |
| Maintenance | No special maintenance required; clean with dry cloth |
| Safety | Use only with specified power supply; observe polarity |
| Spare Parts | Power supply terminal blocks, mounting clips |
| Repairability | Device is not user-serviceable; contact Wago support |
Frequently Asked Questions - 852-103/040-000 Wago
What is the default IP address of the Wago 852-103/040-000 switch?
The default IP address is 192.168.1.1 unless changed by the user.
Can this switch be used with PoE devices?
No, the Wago 852-103/040-000 does not support Power over Ethernet (PoE). It only provides data connectivity.
How do I reset the switch to factory settings?
Press and hold the reset button (located on the front panel) for 10 seconds until the LEDs flash. Release to restore factory defaults.
What is the maximum cable length for Ethernet connections?
The maximum cable length is 100 meters per segment for Cat5e or better cables.
Does this switch support VLAN configuration?
Yes, it supports IEEE 802.1Q VLAN tagging with up to 64 VLAN groups.
How can I mount the switch on a DIN rail?
Clip the switch onto the DIN rail using the integrated spring clip. Ensure it snaps securely into place.
What power supply voltage is required?
The switch requires a 24 V DC power supply (18–32 V range). Connect to the '+' and '-' terminals.
Is the switch suitable for outdoor use?
No, it has an IP20 rating, meaning it is only protected against solid objects >12mm and not against water. Use indoors only.
How do I update the firmware?
Download the firmware from the Wago website and upload via the web interface under 'System > Firmware Update'.
What warranty does this switch have?
Wago provides a 2-year warranty from the date of purchase against manufacturing defects.
User questions about 852-103/040-000 Wago
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual 852-103/040-000 - Wago and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 852-103/040-000 by Wago.
USER MANUAL 852-103/040-000 Wago
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wago
Model : 852-103/040-000
Category : Switch