EasyWeld 130 - Welding machine Cigweld - Free user manual and instructions
Find the device manual for free EasyWeld 130 Cigweld in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | MIG Welding Machine |
| Brand | Cigweld |
| Model | EasyWeld 130 |
| Dimensions (HxWxD) | 300 x 200 x 400 mm (approx.) |
| Weight | 12 kg (approx.) |
| Power Supply | 230 V, 50/60 Hz, single phase |
| Welding Current Range | 30 - 130 A |
| Duty Cycle | 20% at 130 A |
| Wire Diameter | 0.6 - 0.8 mm |
| Functions | MIG welding, gas shielded or gasless flux-cored |
| Maintenance | Regularly clean wire feed mechanism, replace contact tips, check gas nozzles |
| Safety Features | Thermal overload protection, built-in fan cooling, voltage reduction device |
| Spare Parts | Contact tips, nozzles, wire feed rollers, liner, torch |
| Repairability | Modular design; common spare parts available through authorized service centers |
| Accessories Included | MIG torch, gas hose, regulator, ground clamp, electrode holder (optional), chipping hammer |
| Warranty | 2 years limited warranty (check local conditions) |
Frequently Asked Questions - EasyWeld 130 Cigweld
What type of welding can I do with the EasyWeld 130?
The EasyWeld 130 is designed for MIG welding with or without gas (flux-cored wire). It is suitable for mild steel, stainless steel and aluminum with appropriate gas and wire.
What gas should I use?
For mild steel, use CO2 or argon/CO2 mix (75/25). For stainless steel, use argon/CO2 mix. For aluminum, use pure argon. Check wire manufacturer recommendations.
How do I set the welding speed and current?
Adjust the wire feed speed and welding current using the knobs on the front panel. Typically, higher metal thickness requires higher settings. Refer to the manual for recommended charts.
What safety precautions should I take?
Always wear a welding helmet with appropriate shade, gloves, and fire-resistant clothing. Ensure proper ventilation to avoid fumes. Check cables and torch insulation. Use the thermal overload protection feature to prevent overheating.
Why is my weld bead too high or too flat?
A high bead may indicate too low current or too fast wire feed. A flat bead may be due to too high current or too slow wire feed. Adjust in small increments.
How often should I change the contact tip?
Replace the contact tip when you notice irregular arc, wire feeding issues, or if the hole is worn out. Typically every few spools of wire, depending on usage.
Can I weld aluminum with the EasyWeld 130?
Yes, but you need pure argon gas, aluminum wire, and a non-metallic liner or Teflon liner to prevent feeding issues. Recommended wire diameter is 0.8 mm.
What does the thermal overload light indicate?
The thermal overload light turns on when the machine internal temperature exceeds safe levels. The welder will automatically shut down to cool. Wait until the light turns off before resuming.
How do I clean the wire feed mechanism?
Periodically remove the side panel and clean wire feed rollers and drive mechanism from dust and metal chips using a brush or compressed air. Check for proper tension.
Where can I purchase spare parts?
Spare parts like contact tips, nozzles, and wire feed rollers are available through Cigweld authorized dealers or online welding supply stores. Always use original parts for best performance.
User questions about EasyWeld 130 Cigweld
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Welding machine in PDF format for free! Find your manual EasyWeld 130 - Cigweld and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EasyWeld 130 by Cigweld.
USER MANUAL EasyWeld 130 Cigweld
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Cigweld
Model : EasyWeld 130
Category : Welding machine