SB-850 - Blender Pyrex - Free user manual and instructions

Product Type	Blender
Brand	Pyrex
Model	SB-850
Jar Material	Thermal shock resistant glass
Jar Capacity	1.5 L
Blade Material	Stainless steel, 4-point
Motor Power	700 W
Speed Settings	2 speeds + pulse
Dimensions (H x W x D)	40 x 20 x 20 cm
Weight	3.0 kg
Power Supply	220-240 V, 50/60 Hz
Functions	Blend, crush ice, puree, mix
Safety Features	Non-slip feet, safety lock on jar
Cleaning	Removable parts dishwasher safe; jar hand wash recommended
Spare Parts Availability	Replacement jar and blade assembly available
Warranty	2 years

Frequently Asked Questions - SB-850 Pyrex

How do I clean the Pyrex SB-850 blender?

After each use, rinse the jar with warm water and a drop of dish soap, then run a short blend cycle on low speed. Rinse thoroughly. The jar is dishwasher safe on the top rack, but hand drying is recommended to preserve clarity.

What is the maximum capacity for blending hot liquids?

Do not blend hot liquids above 60°C (140°F) in the Pyrex SB-850. The glass jar is thermal shock resistant, but sudden temperature changes can cause breakage. Allow liquids to cool before blending.

Can I crush ice with this blender?

Yes, the Pyrex SB-850 is equipped with a stainless steel blade system and a pulse function that can crush ice. Use short bursts of the pulse function for best results.

What should I do if the blender stops working during operation?

The blender has an auto-shutoff feature to prevent motor overheating. Unplug it and allow it to cool for 15-20 minutes. Ensure the jar is properly locked in place before restarting.

Is the blender jar microwave safe?

No, the Pyrex SB-850 jar is designed for blending only. Do not microwave the jar, as it may cause damage or injury.

What spare parts are available for the SB-850?

Replacement glass jars, blade assemblies, sealing rings, and lids are available. Contact Pyrex customer support or authorized retailers to order.

How do I remove the blade assembly for cleaning?

Unscrew the blade base from the jar by turning it counterclockwise. Be careful as the blades are sharp. Hand wash the base and jar separately. Allow to dry completely before reassembling.

What is the warranty period for the Pyrex SB-850?

The Pyrex SB-850 comes with a 2-year limited warranty covering manufacturing defects. Proof of purchase is required. Does not cover misuse or normal wear.

Can I blend frozen fruits directly?

Yes, but cut frozen fruits into small chunks (about 2 cm) and use the pulse function. Do not overload; start with a small amount of liquid to help the blending process.

How do I adjust speed settings?

The SB-850 features a rotary dial with 2 speed settings (low and high) and a push button for pulse. Turn the dial to the desired speed and use the pulse button for short bursts.

USER MANUAL SB-850 Pyrex

Exterior view of a modern kitchen blender with clear glass and black handle (no text or symbols visible)

Thank you for choosing a product of the new PYREX® electrical appliances range.

We hope that you will be satisfied by the use of this product.

The well-known ovenproof glass cookware PYREX ^® has been a part of the Greek households for over 60 years. The range is now further supplemented with non-stick cookware and electrical appliances.

Περιεχόμενα

OEλ 1

• PARTS OF THE APPLIANCE

• BEFORE FIRST USE

• USE THE BLENDER

page\_20

- BLENDER HINTS

page 21

• TROUBLESHOOTING GUIDE

page\_22

• CARE AND CLEANING

page\_23

- STORAGE

• TECHNICAL CHARACTERISTICS

page\_24

• IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC

page 25

• SERVICE AND CUSTOMER CARE

Οδηγίες | Χρήσης

Μπλέντερ SB-850

Instructions | Manual

Blender SB-850

Please unfold the front page in order to check on the detailed view of the product.

• Read these instructions carefully and keep for future reference.
• Please keep the sales receipt for guarantee purposes.
• Remove all packaging.

IMPORTANT SAFEGUARDS

• Make sure your electricity supply is the same as the one shown on the underside of the appliance.
• Never leave the appliance unattended when it is operating.
• Close supervision is necessary when your appliance is being used near children or infirm persons. Ensure that they do not play with the appliance.
• This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, children or those with lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do not touch the sharp blades. Keep the blade unit away from children.

• Switch off and unplug:

• Before fitting or removing parts.

• After each use.

• Before cleaning.

• Never use the appliance for any other use than indicated.

• The device is intended for indoor use. Do not use the device outdoors.
• The device is intended only for domestic use. Any other use will cancel the warranty.
  • Always use the blender on a secure, dry level surface.
• Do not operate or place the device or parts in places of high humidity or where it may get wet.
• Always unplug the appliance before putting your hands or utensils in the goblet.
• Never fit the blade unit to the power unit without the blender goblet fitted.
• Only operate the blender with the lid in place.
• Do not remove the lid of the blender when in operation.
• Always take care when handling the blade assembly and avoid touching the cutting edge of the blades when cleaning.
• Only use the goblet with the blade assembly provided.
• Never let the power unit, cord or plug get wet.
• If the appliance does get wet, immediately remove the power cord from the wall outlet and do not put your hands in the water. Never run the wet

appliance and contact one of the authorized BENRUBI service centers.

ATTENTION: It is not recommended to place hot ingredients in the jug.

- When removing the blender from the power unit:

- Wait until the blades have completely stopped.

- Don't accidentally unscrew the goblet from the blade assembly.

- Never run the blender empty.

- Never blend more than the maximum capacity stated in the recommended usage chart.

• To ensure long life of your blender, do not run for longer than 60 seconds.

- Never blend frozen ingredients that have formed a solid mas during freezing, break it up before adding to the goblet.

- Do not process hard spices, such as nutmeg or turmeric root as they may damage the blade.

- Do not use the blender as a storage container. Keep it empty before and after use.

- Never place this appliance on or near a hot gas or electric burner or where it could touch a heated appliance.

- Misuse of your blender can result in injury.

- Do not let the power cord of the appliance hang over the edge of a table or bench top or where a child could grab it. Do not let the power cord to touch any hot surface.

- Never leave the power cable wrapped during use. Unwind it completely.

• Never use highly corrosive or abstractive cleaning agents. Never use metal scouring pads for cleaning.
• Do not move the appliance when it is in operation.
• Do not touch the appliance with wet or damp hands.
• Do not use an extension power cord.
• Check the power cord periodically for possible damages.
• If the power cord or the plug of the appliance has been damaged, do not use the appliance and contact an authorized PYREX-BENRUBI Service Center.
• In case of a possible damage, do not attempt to repair the appliance by yourself. Please contact one of the authorized PYREX-BENRUBI service centers.
• Any repair made by an unauthorized PYREX-BENRUBI Service Center CANCELS THE GUARANTEE.
• Any misuse of the device cancels the warranty.
• Only use original spare parts PYREX®.
• The appliance conforms to EU directive 2014/30/EU on Electromagnetic Compatibility, the 2014/35/EU Low Voltage Directive, the 2011/65/EU RoHS Directive, the directive 2009/125/EC for eco-design and the EC regulation no. 1935/2004 on materials intended to contact with food.

SAVE THESE INSTRUCTIONS

16-17_GB

PARTS OF THE APPLIANCE

1. Filler cap
2. Locking lid
3. Glass jar 1,75lt
4. Jar sealing ring
5. Blade unit
6. Power unit
7. Speed knob
8. Anti-slip feet
9. Power cord

BEFORE FIRST USE

- Wash the parts of the appliance. See "Care and cleaning" section.

USE THE BLENDER

Caution: Make sure the device is turned off (position "0") before placing the goblet on the base of the blender.

1. Screw the blade unit (5) onto the glass jar (3) ensuring that the sealing ring is correctly positioned.

Note: Leaking will occur if the sealing ring is damaged or incorrectly fitted.

1. Put the ingredients into the glass jar (3).
2. Fit the locking lid (2) onto the glass jar (3).
3. Place the filler cap (1) on the locking lid (2).
4. Place the glass jar on the power unit (6) by turning clockwise ensuring that it is correctly fitted on the locking position.
5. Plug in the appliance.

Note: The appliance won't work if the blender is incorrectly fitted.

1. Turn the speed knob (7) to the desired position.

Note: Turn the speed knob (7) anticlockwise to position “P” to activate pulse mode.

1. When you have finished mixing the ingredients, turn the speed knob (7) to the "0" position and disconnect.

2. Remove the jar from the base of the device and empty.

Note: When you turn on the blender, always press the lid with your hand.

BLENDER HINTS

• To blend dry ingredients - cut into pieces, remove the filler cap, then with the appliance running, drop the pieces down one by one. Keep your hand over the opening. For best results empty regularly.
• The processing of spices is not recommended as they may damage the plastic parts.
• When making mayonnaise, put all ingredients, except oil, into the blender. Remove the filler cap. Then, with the appliance running, add the oil slowly through the hole in the lid.
• Thick mixtures, e.g. pâtés and dips, may need scraping down. If the mixture is difficult to process, add more liquid.
• Before you consume the blended food, always check for ingredients that may not have been mixed properly.
• For best results, make sure that the amount of ingredients completely covers the blades when mixing solid foods.

TROUBLESHOOTING GUIDE

Problem Cause	Solution
The blender will not operate	No powerBlender not assembled correctly	Check blender plugged inCheck blade unit is fully tightened to the gobletCheck if the blender glass jar is placed correctly.
Blender leaking for blade assembly	Seal missingSeal incorrectly fitted Seal damaged	Check seal is fitted correctly and not damaged
Blender seal is missing from the blade unit when removed from packaging	The seal is packed pre-fitted to the blade unit	Unscrew goblet and check that seal is fitted to blade unit.
If none of the above solves the problem, see “Service & Customer Care”.

CARE AND CLEANING

• Always switch off, unplug and dismantle before cleaning.
- Empty the goblet before unscrewing it from the blade unit
- Do not immerse the blade unit in water.
- Do not place any parts and blender glass jar in the dishwasher.

Cleaning the power unit

• Wipe with a damp cloth. Then dry well.
• Don't immerse the power unit in water.

Cleaning blender blade unit

• Remove and clean the sealing ring.
• Don't touch the sharp blades. Brush them clean using hot soapy water and then rinse thoroughly under the tap.
• Don't immerse the blade unit in water.
• Don’t wash in the dishwasher.

Cleaning blender glass jar and safety lid and filler cap

• Clean well using hot soapy water and then rinse thoroughly under the tap.
• Leave to dry upside down.
• Don’t wash in the dishwasher.

STORAGE

• Always unplug the appliance if not in use.
- Make sure the appliance is clean and dry before storage.
- Store the appliance in a clean, dry and cool place in its packaging or in such manner so that it is protected from the dust.
- Before you use the appliance after a long time period, make sure it is clean and dry.
- Store the appliance away from the reach of children.

TECHNICAL CHARACTERISTICS

Model: Blender SB - 850

Rated voltage / Frequency: 220 - 240V \~ 50 - 60Hz

Power: 850 W

Blender glass jar capacity: 1.75Lt

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources.

As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

SERVICE AND CUSTOMER CARE

• BENRUBI Company guarantees its products for any manufacturing defect or defective materials for a period of two (2) years from the date of purchase or delivery by presenting purchase receipt. If your product malfunctions or you find any defects, please revert to the retail location you have purchased it from or contact an authorized PYREX-BENRUBI Service Centre. To find the nearest authorized PYREX-BENRUBI Service Centre, visit our website www.benrubi.gr. It is in the discretion of BENRUBI Company to replace or repair the defective product.
• The warranty does not cover damages resulting from normal wear, breakage, scaling, improper installation or maintenance of the product, mishandling, abnormal working conditions, failure to implement the instructions, conversion or repair of the product by an unauthorized technician who does not belong to the PYREX-BENRUBI Service Centers.

Also, the warranty does not cover the following indicative factors:

• Stains, discoloration or scratches.
- Burns due to exposure to heat or flame.
- Damage from thermal shock (sudden temperature change or change of voltage).

FOR MORE INFORMATION CONTACT:

(NEW) H. BENRUBI & FILS SA

27 Aghiou Thoma str, GR15124, Maroussi - Athens

Tel. / Customer Support: 210 6156400

e-mail: [e-mail]

24-25_GB

(NEW) H. BENRUBI & FILS SA

27 Aghiou Thoma str, GR15124, Maroussi - Athens

Tel. / Customer Support: 210 6156400, e-mail: [e-mail]

Pyrex ^® is a trademark of Corning Incorporated used under license by international Cookware