TX2 Pro - Router Tenda - Free user manual and instructions
Find the device manual for free TX2 Pro Tenda in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Model | Tenda TX2 Pro |
| Dimensions (W x D x H) | 200 x 120 x 30 mm |
| Weight | 300 g |
| Power Supply | 12V DC, 1A |
| Wi-Fi Standard | IEEE 802.11ax (Wi-Fi 6) |
| Frequency Bands | 2.4 GHz + 5 GHz |
| Maximum Data Rate | Up to 1500 Mbps (2.4 GHz: 300 Mbps, 5 GHz: 1200 Mbps) |
| Ethernet Ports | 3 x 10/100/1000 Mbps LAN, 1 x 10/100/1000 Mbps WAN |
| Antennas | 4 x External 5 dBi |
| Processor | 1.5 GHz dual-core |
| Memory | 128 MB RAM, 16 MB Flash |
| Wireless Security | WPA2-PSK, WPA3-PSK, WPA-Enterprise |
| Key Features | MU-MIMO, Beamforming, IPv6, Guest Network |
| Management | Web interface, Tenda WiFi App |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use liquids or aerosols. |
| Safety Warnings | Keep away from water and heat sources. Do not open the device. |
| Regulatory Compliance | CE, FCC, RoHS |
Frequently Asked Questions - TX2 Pro Tenda
How do I set up the Tenda TX2 Pro router?
Connect the router to your modem via the WAN port using an Ethernet cable. Power on the router, then connect your computer or phone to the router's Wi-Fi network. Open a web browser and go to tendawifi.com or 192.168.0.1 to start the setup wizard.
What is the default IP address of the Tenda TX2 Pro?
The default IP address is 192.168.0.1. You can also use tendawifi.com to access the router's web interface.
How do I reset the Tenda TX2 Pro to factory settings?
Locate the Reset button on the back of the router. Use a paperclip or similar object to press and hold the button for about 10 seconds until the LED lights flash. Release the button; the router will restart with factory defaults.
Does the Tenda TX2 Pro support Wi-Fi 6?
Yes, the Tenda TX2 Pro supports Wi-Fi 6 (802.11ax) for faster speeds and better efficiency on compatible devices.
How can I change the Wi-Fi password on the Tenda TX2 Pro?
Log in to the router's web interface (http://tendawifi.com). Go to Wireless Settings or Wi-Fi Settings, then modify the password in the security field. Save the changes and reconnect your devices.
What should I do if my internet connection is unstable?
First, check all cable connections and reboot both modem and router. Update the router's firmware via the web interface. Also, try changing the Wi-Fi channel in the Wireless Settings to avoid interference.
Can I use the Tenda TX2 Pro as a repeater?
No, the Tenda TX2 Pro is a primary router and does not support repeater mode. However, you can configure it as an Access Point if needed by logging in and changing the working mode.
How many devices can the Tenda TX2 Pro support?
The Tenda TX2 Pro can handle up to 30-40 devices simultaneously under normal usage, depending on bandwidth and activity.
Is the Tenda TX2 Pro compatible with IPv6?
Yes, the router supports IPv6. You can enable it in the Network Settings section of the web interface.
How do I update the firmware on the Tenda TX2 Pro?
Visit the Tenda support website to download the latest firmware for the TX2 Pro. Log into the router's web interface, go to System Tools > Firmware Upgrade, select the downloaded file, and click Upgrade. Do not turn off the power during the update.
User questions about TX2 Pro Tenda
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual TX2 Pro - Tenda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TX2 Pro by Tenda.
USER MANUAL TX2 Pro Tenda
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tenda
Model : TX2 Pro
Category : Router