Planar 2 - Uncategorized Intellijel - Free user manual and instructions
Find the device manual for free Planar 2 Intellijel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Eurorack synthesizer module |
| Width | 20 HP |
| Depth | 25 mm (1 inch) |
| Power Consumption | +12V: 100 mA, -12V: 30 mA |
| Power Connector | 16-pin Eurorack ribbon cable |
| Main Function | Vector mixing and joystick-controlled voltage source |
| Joystick Type | Analog, spring-return to center |
| CV Outputs | X, Y, and vector (via crossfader) |
| Gate Output | Trigger when joystick crosses center |
| Inputs | 4 CV inputs for vector mixing (A, B, C, D) |
| Attenuverters | On each CV input |
| Output Modes | Unipolar and bipolar selectable |
| LED Indicators | Joysick position and activity |
| Operating Temperature | 0°C to 50°C |
| Construction | PCB-mounted controls, aluminum faceplate |
| Weight | 120 g (4.2 oz) |
| Warranty | 2 years (check with retailer) |
| Compliance | CE, RoHS |
Frequently Asked Questions - Planar 2 Intellijel
What is the Planar 2 module used for?
The Planar 2 is a joystick-based vector mixer and voltage source. It allows you to blend up to four CV signals using the joystick position, or use the joystick to generate X, Y, and vector CV outputs.
How do I calibrate the joystick?
Hold the Learn button for 3 seconds. Move the joystick to the maximum X and Y positions, then back to center. The LEDs will flash to confirm calibration.
Can I use the Planar 2 without Eurorack power?
No, it requires a standard Eurorack power supply with +12V and -12V rails, connected via a 16-pin ribbon cable.
What do the X and Y outputs do?
They output voltage from -5V to +5V (bipolar) or 0V to +10V (unipolar), corresponding to the joystick's horizontal and vertical position.
How does vector mixing work?
The Planar 2 crossfades between four CV inputs (A, B, C, D) based on joystick quadrant. Each input has an attenuverter to control its level and polarity.
Is there a gate or trigger output?
Yes, there is a Gate output that goes high when the joystick is moved away from center, and a trigger output when it passes through center.
Can I use it to control a filter cutoff?
Absolutely. Patch any CV output (X, Y, or vector) to a filter's cutoff input and move the joystick to modulate it in real time.
How do I clean the module?
Disconnect power. Use a dry, lint-free cloth to wipe the faceplate. For stubborn dirt, slightly dampen the cloth with isopropyl alcohol. Avoid moisture entering the module.
What is the warranty period?
Intellijel typically provides a 2-year warranty from the date of purchase. Check with your retailer for details.
Can I replace the joystick if it breaks?
Yes, the joystick is a standard component. Contact Intellijel support or an authorized repair center for replacement parts and instructions.
User questions about Planar 2 Intellijel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Planar 2 - Intellijel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Planar 2 by Intellijel.
USER MANUAL Planar 2 Intellijel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Intellijel
Model : Planar 2
Category : Uncategorized