VM202 - Circuit breaker HAGER - Free user manual and instructions
Find the device manual for free VM202 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circuit breaker |
| Brand | Hager |
| Model | VM202 |
| Number of Poles | 2 |
| Rated Current (In) | 20 A |
| Rated Voltage | 230/400 V AC |
| Breaking Capacity | 6 kA |
| Tripping Characteristic | Type C |
| Mounting | DIN rail (35 mm) |
| Dimensions (W x H x D) | 36 x 85 x 70 mm |
| Weight | 0.15 kg |
| Standards | EN 60898-1 |
| Protection Functions | Overload and short-circuit protection |
| Mechanical Endurance | 20,000 cycles |
| Electrical Endurance | 10,000 cycles |
| Operating Temperature Range | -5°C to +40°C |
| Degree of Protection | IP20 (installed) |
| Maintenance | None required; keep clean and dry |
| Safety | Designed for safe isolation; use insulated tools |
| Environmental Compliance | RoHS, WEEE |
Frequently Asked Questions - VM202 HAGER
How do I install the Hager VM202 circuit breaker?
The VM202 snaps onto a standard 35 mm DIN rail. Ensure the rail is firmly mounted. Push the breaker onto the rail until it clicks. Connect the line and load wires to the appropriate terminals, tightening screws to the specified torque (2-3 Nm). Always disconnect power before installation.
What does the rating 20A mean?
The rated current (In) is 20 A, meaning the breaker is designed to carry up to 20 A continuously under normal conditions. It will trip if the current exceeds this value for a prolonged period.
Why does my VM202 keep tripping?
Common causes include overload (too many devices on the circuit), short circuit, or a faulty appliance. Check the load and inspect for damaged wiring. If tripping persists, consult an electrician.
What is the breaking capacity?
The breaking capacity is 6 kA, meaning it can safely interrupt a fault current up to 6,000 A without damage. This is suitable for most residential applications.
Is the VM202 suitable for three-phase systems?
The VM202 is a 2-pole breaker, typically used for single-phase (230V) or split-phase (230/400V) applications. For 3-phase, you would need a 3-pole or 4-pole breaker.
Can I use the VM202 in a high-temperature environment?
The operating temperature range is -5°C to +40°C. If ambient temperature exceeds 40°C, the breaker may derate. Refer to technical data for specific derating factors.
How do I reset the breaker after a trip?
First, identify and correct the cause of the trip. Then, move the toggle switch firmly to the OFF position and then back to ON. If it trips again immediately, do not reset; call a professional.
What maintenance does the VM202 require?
No regular maintenance is needed. Periodically check for dust or moisture and clean with a dry cloth. Ensure terminals are tight. Do not open the breaker enclosure.
Is the VM202 compatible with other brands?
It fits any standard 35 mm DIN rail and is electrically compatible with most distribution boards, but always ensure that the rated current and breaking capacity match your system requirements.
What tools do I need to install this breaker?
You will need a screwdriver (to tighten terminals), a voltage tester, and possibly wire strippers. Always use insulated tools for safety.
User questions about VM202 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Circuit breaker in PDF format for free! Find your manual VM202 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VM202 by HAGER.
USER MANUAL VM202 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : VM202
Category : Circuit breaker