Fanvil

i64 - Doorbell Fanvil - Free user manual and instructions

Find the device manual for free i64 Fanvil in PDF.

📄 10 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Fanvil i64 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type IP Video Doorbell
Brand Fanvil
Model i64
Dimensions (approx.) 130 x 50 x 30 mm
Weight (approx.) 200 g
Power Supply PoE (802.3af) or DC 12V 1A
Power Consumption Less than 5W
Camera Resolution 2MP (1920x1080)
Field of View 120° diagonal
Night Vision Yes, IR up to 5m
Audio Two-way audio (built-in mic and speaker)
Video Compression H.264/H.265
Network Interface 10/100Mbps Ethernet (RJ45)
Protocols SIP, RTSP, ONVIF, HTTP
Motion Detection Yes, configurable sensitivity
Ingress Protection IP65 (weather resistant)
Mounting Wall mount (bracket included)
Operating Temperature -20°C to 50°C
Maintenance & Cleaning Wipe with a dry, soft cloth. Do not use water or cleaners.
Safety Use only supplied PoE switch or DC adapter. Follow local electrical codes.
Spare Parts & Repair Contact Fanvil support or authorized dealer for replacement parts.
General Information User manual available in PDF at notice-facile.com

Frequently Asked Questions - i64 Fanvil

How do I reset the Fanvil i64 to factory defaults?
Press and hold the reset button (pinhole) on the back for 10 seconds while powered. The device will reboot to factory settings.
What power options does the i64 support?
It supports Power over Ethernet (PoE 802.3af) and an optional DC 12V 1A adapter (not included).
Is the Fanvil i64 waterproof?
It has an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets. It is suitable for outdoor use under eaves.
Can the i64 be integrated with a SIP phone system?
Yes, it supports SIP protocol for integration with most IP PBXs and VoIP systems.
How do I configure the doorbell for the first time?
Connect it via Ethernet, obtain an IP address (DHCP), then access the web interface with the IP to configure SIP account, video settings, etc. Refer to the manual for details.
Does the i64 support night vision?
Yes, it has built-in IR LEDs for night vision up to 5 meters in low light conditions.
What is the camera resolution and field of view?
The camera is 2MP (1920x1080) with a 120° diagonal field of view.
How can I clean and maintain the device?
Clean the exterior with a dry, soft cloth. Avoid using water, solvents, or abrasive cleaners. Periodically check seals and connections.
Does the doorbell support ONVIF for third-party NVRs?
Yes, it is ONVIF-compliant (Profile S/T), allowing integration with compatible NVR software.
Where can I find the full user manual?
The manual is available for free download in PDF format at notice-facile.com in multiple languages.

User questions about i64 Fanvil

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Doorbell in PDF format for free! Find your manual i64 - Fanvil and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. i64 by Fanvil.

USER MANUAL i64 Fanvil

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Fanvil

Model : i64

Category : Doorbell