H-33 - Barcode Reader Opticon - Free user manual and instructions
Find the device manual for free H-33 Opticon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Barcode Reader |
| Model | H-33 |
| Brand | Opticon |
| Scanning Technology | Laser / 2D Imager |
| Symbologies Supported | 1D (UPC, EAN, Code 39, etc.) and 2D (QR, Data Matrix, etc.) |
| Connectivity | Bluetooth, USB, RS-232 |
| Dimensions (L x W x H) | 170 mm x 70 mm x 100 mm |
| Weight | 200 g (including battery) |
| Power Supply | Rechargeable Li-ion battery, 3.7 V, 2000 mAh |
| Battery Life | Up to 12 hours of continuous scanning |
| Scan Range | Up to 30 cm for 1D barcodes |
| Operating Temperature | 0°C to 40°C |
| Humidity | 5% to 95% non-condensing |
| Drop Resistance | 1.5 m onto concrete |
| IP Rating | IP42 |
| Indicators | LED, Beeper, Vibrator |
| Cleaning Instructions | Wipe with a dry, soft cloth; do not use liquids |
| Storage Temperature | -20°C to 60°C |
| Included Accessories | USB cable, charging cradle, manual |
| Warranty | 1 year limited |
Frequently Asked Questions - H-33 Opticon
How do I connect the H-33 to my computer via Bluetooth?
Ensure the scanner is charged. Turn on Bluetooth on your computer. Press the Bluetooth button on the scanner until the LED blinks blue. On your computer, select 'Opticon H-33' from the list of devices and pair. The scanner will beep when connected.
What types of barcodes can the H-33 read?
The H-33 reads all common 1D barcodes (UPC, EAN, Code 128, Code 39, etc.) and 2D barcodes (QR, Data Matrix, PDF417, etc.).
How do I reset the H-33 to factory settings?
To reset, scan the 'Reset' barcode from the user manual. If the manual is unavailable, press and hold the trigger and the left button simultaneously for 10 seconds until the scanner beeps twice.
What battery does the H-33 use?
The H-33 uses a rechargeable Li-ion battery (3.7V, 2000 mAh). You can replace it by removing the battery cover on the back.
How long does the battery last?
Battery life is up to 12 hours of continuous scanning. Charging time is approximately 3 hours.
Can I use the H-33 while it's charging?
Yes, the H-33 can be used while plugged into a power source via the USB cable or charging cradle.
What is the scanning range of the H-33?
For standard 1D barcodes, the scanning range is up to 30 cm. For 2D codes, it is up to 20 cm depending on code size and quality.
How do I clean the H-33?
Turn off the scanner. Wipe the exterior with a dry, soft cloth. Do not use any liquids or abrasive cleaners. Clean the scan window gently with a lens cleaning cloth.
What does the flashing red LED mean?
A flashing red LED indicates low battery. Please charge the scanner soon. A solid red LED means battery is charging; green means fully charged.
Is the H-33 water resistant?
The H-33 has an IP42 rating, which means it is protected against solid objects larger than 1mm and dripping water. Do not submerge or expose to heavy rain.
User questions about H-33 Opticon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual H-33 - Opticon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H-33 by Opticon.