B250-XTS - Helmet BlueParrott - Free user manual and instructions
Find the device manual for free B250-XTS BlueParrott in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Bluetooth Headset |
| Brand | BlueParrott |
| Model | B250-XTS |
| Category | Helmet-Compatible Headset |
| Dimensions (Headset) | Approx. 7.6 x 6.4 x 2.5 cm |
| Weight | Approx. 85 g |
| Battery Type | Lithium-Ion, rechargeable |
| Battery Life | Up to 24 hours talk time |
| Standby Time | Up to 500 hours |
| Charging Time | Approx. 2 hours |
| Bluetooth Version | Bluetooth 4.0 |
| Wireless Range | Up to 300 feet (90 meters) |
| Noise Cancellation | Yes, advanced noise-canceling microphone |
| Audio Features | Wind reduction, echo cancellation |
| Controls | Multifunction button, volume rocker |
| Compatibility | Most smartphones and Bluetooth devices |
| Mounting | Over-the-head or under-chin helmet compatible |
| Operating Temperature | -10°C to 50°C |
| Warranty | 2 years limited |
| Cleaning | Wipe with a soft, dry cloth |
| Part Number | 203236 |
Frequently Asked Questions - B250-XTS BlueParrott
How do I pair the BlueParrott B250-XTS with my phone?
Ensure the headset is off. Press and hold the multifunction button until the LED flashes red/blue. On your phone, enable Bluetooth and select 'BlueParrott B250-XTS'. Enter PIN 0000 if prompted. You will hear 'connected'.
How do I adjust the volume?
Use the volume rocker on the headset. Press the top for louder, bottom for softer. A beep indicates max or min volume.
How long does the battery last?
The B250-XTS provides up to 24 hours of talk time and up to 500 hours standby. Actual performance varies with usage and settings.
Can I use the headset with a helmet?
Yes, the B250-XTS is designed for helmet use. It includes a helmet docking kit for over-the-head or under-chin mounting. Follow the manual for installation.
How do I charge the headset?
Connect the supplied USB charging cable to the headset's micro-USB port. Plug into a USB power source. The LED turns red during charging and blue when fully charged. Charging takes about 2 hours.
How do I answer a call?
Press the multifunction button once to answer an incoming call. Press again to end the call. To reject a call, press and hold the button for 2 seconds.
The headset is not charging. What should I check?
Ensure the charging cable is firmly connected. Try a different USB port or power adapter. If the battery is completely drained, it may take a few minutes before the LED shows charging. If still not working, contact support.
Can I use the headset while charging?
Yes, the B250-XTS supports pass-through charging, allowing you to use the headset while it is plugged in.
How do I reset the headset to factory settings?
To reset, press and hold the multifunction button and volume up button together for about 5 seconds until the LED flashes purple. This clears paired devices and restores defaults.
Is the headset water-resistant?
The B250-XTS is not rated as waterproof, but it has a splash-resistant design suitable for light rain or sweat. Do not submerge in water.
User questions about B250-XTS BlueParrott
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Helmet in PDF format for free! Find your manual B250-XTS - BlueParrott and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B250-XTS by BlueParrott.