TCM-3111 - Surveillance Camera ACTi - Free user manual and instructions
Find the device manual for free TCM-3111 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | ACTi |
| Model | TCM-3111 |
| Image Sensor | 1/2.7" Progressive Scan CMOS |
| Resolution | 1920 x 1080 (2MP) |
| Lens | 2.8mm fixed lens |
| IR Range | Up to 30 meters |
| Video Compression | H.264, MJPEG |
| Network Interface | 10/100 Base-T Ethernet |
| Power Supply | PoE (IEEE 802.3af), 12V DC |
| Power Consumption | Max 5W |
| Dimensions (Diameter x Height) | 120mm x 90mm |
| Weight | 0.5 kg |
| Ingress Protection | IP66 |
| Operating Temperature | -10°C to 50°C |
| Mounting | Ceiling or wall mount |
| Audio | Built-in microphone |
| Alarm I/O | 1 input, 1 output |
| Storage | microSD card slot (up to 128GB) |
| Compliance | ONVIF Profile S |
| Warranty | 3 years |
Frequently Asked Questions - TCM-3111 ACTi
How do I reset the ACTi TCM-3111 camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot with factory settings. The default IP address is 192.168.0.100.
What is the default username and password for the TCM-3111?
The default login is admin with no password. It is strongly recommended to set a secure password during initial setup.
Can the TCM-3111 be used outdoors?
Yes, the camera has an IP66 rating, making it weather-resistant and suitable for outdoor use.
How do I access the camera remotely?
Ensure the camera is connected to a network with internet access. Use the ACTi NVR software or a web browser with the camera's IP address. For remote access, configure port forwarding or use ACTi's cloud service.
What type of power supply does the TCM-3111 require?
The camera supports Power over Ethernet (PoE) IEEE 802.3af, or alternatively a 12V DC power adapter (not included).
Does the TCM-3111 support night vision?
Yes, it has built-in IR LEDs with a range of up to 30 meters for clear night vision in complete darkness.
How do I update the firmware on the TCM-3111?
Download the latest firmware from the ACTi website. Access the camera's web interface, go to Maintenance > Firmware Upgrade, and upload the file. Do not power off during the update.
Is the TCM-3111 compatible with third-party NVR software?
Yes, the camera is ONVIF Profile S compliant, ensuring compatibility with many third-party NVRs and video management systems.
What is the maximum resolution and frame rate of the TCM-3111?
The camera can stream 1920x1080 at up to 30 frames per second in H.264 compression.
How do I clean the camera lens and housing?
Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Avoid abrasive materials. For the dome, use a microfiber cloth to prevent scratches.
User questions about TCM-3111 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual TCM-3111 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TCM-3111 by ACTi.
USER MANUAL TCM-3111 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : TCM-3111
Category : Surveillance Camera