E99M - Surveillance Camera ACTi - Free user manual and instructions
Find the device manual for free E99M ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Surveillance Camera |
| Model | E99M |
| Brand | ACTi |
| Resolution | 2 MP (1920 x 1080) @ 30 fps |
| Lens | 2.8mm fixed lens |
| Night Vision | IR LEDs up to 30 meters |
| Field of View | 95° horizontal |
| Power Supply | PoE (IEEE 802.3af) or DC 12V |
| Power Consumption | Max 5W |
| Dimensions | 140 x 65 x 60 mm |
| Weight | 0.4 kg |
| Weatherproof Rating | IP66 |
| Operating Temperature | -30°C to 50°C |
| Video Compression | H.264, MJPEG |
| Audio | Two-way audio (built-in mic and speaker) |
| Motion Detection | Yes, with configurable zones |
| Storage | MicroSD card slot (up to 128 GB) |
| Network | Ethernet 10/100 Mbps |
| Protocols | IPv4, TCP/IP, HTTP, RTSP, ONVIF |
| Maintenance | Clean lens with a soft, dry cloth. Keep vents clear. |
| Safety | Use only supplied power adapter. Do not expose to extreme heat. |
| Spare Parts / Repairability | Contact ACTi support for replacement parts. Limited user-serviceable parts. |
| General Information | Refer to the user manual for detailed installation and firmware updates. |
Frequently Asked Questions - E99M ACTi
How do I reset the ACTi E99M camera to factory defaults?
Press and hold the reset button located on the camera's base for 10 seconds while the camera is powered on. The camera will reboot with default settings.
What is the default IP address of the E99M?
The default IP address is 192.168.0.90. You can also use the ACTi IP Utility tool to discover the camera on your network.
Can the E99M be used outdoors?
Yes, the E99M has an IP66 weatherproof rating, making it suitable for outdoor use in rain, snow, and dust.
How do I connect the E99M to an NVR?
Ensure the NVR and camera are on the same network. Use the ONVIF protocol; add the camera by its IP address and enter the username (admin) and password (default is blank or 'admin').
How do I update the firmware on the E99M?
Download the latest firmware from the ACTi website. Access the camera's web interface, go to Maintenance > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
What is the field of view of the E99M?
The camera has a 95° horizontal field of view with its 2.8mm lens.
How can I view the E99M camera remotely?
You can view the camera via the ACTi CMS software, web browser (IE, Chrome with plug-in), or the ACTi mobile app. Ensure port forwarding is set up on your router.
How do I configure motion detection on the E99M?
Access the camera's web interface, go to Events > Motion Detection. Enable it, draw detection zones, and set sensitivity. You can also link it to email alerts or recording.
What should I do if the camera shows no video?
Check network connectivity (cable/switch), verify power (PoE or DC adapter), ensure correct IP address, and try restarting the camera. If using a browser, install the necessary plug-in.
Does the E99M support audio?
Yes, it has a built-in microphone and speaker for two-way audio. Audio must be enabled in the camera settings and supported by your viewer.
User questions about E99M ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual E99M - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E99M by ACTi.
USER MANUAL E99M ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : E99M
Category : Surveillance Camera