THERMIC4000RC - Pressure washer Lavor - Free user manual and instructions
Find the device manual for free THERMIC4000RC Lavor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hot Water Pressure Washer |
| Brand | Lavor |
| Model | THERMIC4000RC |
| Power Supply | 230 V ~ 50 Hz |
| Power Consumption | 4000 W |
| Maximum Pressure | 150 bar |
| Maximum Water Flow | 600 L/h |
| Maximum Water Temperature | 80 °C |
| Dimensions (L x W x H) | 700 x 450 x 800 mm |
| Weight | 45 kg |
| Hose Length | 10 m |
| Power Cord Length | 5 m |
| Nozzle Type | Adjustable (0° - 90°) |
| Detergent Tank Capacity | 2 L |
| Fuel Type | Diesel (for heating) |
| Heating Power | 25 kW |
| Sound Pressure Level | 85 dB(A) |
| Protection Class | IPX5 |
Frequently Asked Questions - THERMIC4000RC Lavor
What type of fuel does the Lavor THERMIC4000RC use for heating?
The heater runs on diesel. Ensure you use clean diesel to avoid clogging.
Can I use cold water only?
Yes, the machine can operate in cold water mode. Simply turn off the heating function.
How do I adjust the pressure?
Pressure is adjusted via the unloader valve or by changing the nozzle tip. Rotate the nozzle to select spray angle; narrower angles give higher pressure.
What is the maximum inlet water temperature?
The maximum inlet temperature is 40 °C. Hotter water may damage the pump.
How often should I change the pump oil?
Change the pump oil after the first 50 hours, then every 200 hours or annually. Use SAE 30 non-detergent oil.
What should I do if the machine doesn't start?
Check the power cord, fuse, and thermal overload switch. Also ensure the on/off switch is in the 'on' position.
Is it safe to use with a extension cord?
Yes, but use a heavy-duty cord rated for at least 15 amps and keep it as short as possible to avoid voltage drop.
How do I clean the nozzle?
Remove the nozzle and use a paperclip to clear any debris. Soak in vinegar if mineral deposits persist.
Can I use bleach or other chemicals?
Only use detergents recommended for pressure washers. Avoid bleach as it can damage the pump and seals.
Where can I find spare parts?
Spare parts are available from authorized Lavor dealers or online. Common parts include nozzles, hoses, and pump seals.
User questions about THERMIC4000RC Lavor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual THERMIC4000RC - Lavor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. THERMIC4000RC by Lavor.